ICP Gas Valve Mounting Bracket for RGS180LFAA0AAAA — OEM | Ships Today

Overview

This OEM gas valve mounting bracket (part #1184226) secures and positions the gas valve within the burner assembly of your ICP/Tempstar/Heil RGS180LFAA0AAAA gas furnace. The bracket holds the valve in correct alignment with the manifold and burner orifices so gas flow and combustion stay properly set. While the bracket itself rarely fails electrically, it is replaced when corroded, cracked, or bent from service, or when reinstalling a gas valve after a repair. A misaligned or missing bracket can let the valve and manifold shift, causing poor burner flame and noisy combustion.

Specifications

Compatibility

Direct-fit for the ICP/Tempstar/Heil RGS180LFAA0AAAA and related Comfortmaker, Arcoaire, and KeepRite furnaces using gas-valve bracket 1184226. Verify the bolt pattern and valve-mount orientation match your existing bracket.

Installation Guide

1. Safety First — Shut off gas at the manual valve and disconnect electrical power; verify zero voltage with a multimeter.
2. Access — Remove the furnace burner-compartment door.
3. Document — Photograph the gas valve and bracket position before disassembly.
4. Remove — Disconnect the gas line and valve as needed, then unfasten the old bracket from the burner assembly.
5. Install — Mount the new bracket, reattach the gas valve in its original alignment, and reconnect the gas line.
6. Test — Restore gas and power, leak-check all joints with soap solution, and confirm a clean, stable burner flame.

Signs You Need a Replacement

• Corroded, cracked, or bent existing bracket
• Gas valve shifts or is no longer held in alignment
• Burner flame appears uneven after a valve repair
• Bracket hardware stripped or missing during service

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.