ICP Gas Valve Mounting Bracket for RGS180HSAA0AAAA — OEM 1184226 | Ships Today

Overview

This is the genuine OEM gas valve mounting bracket, part number 1184226, for the ICP/Tempstar/Heil RGS180HSAA0AAAA gas furnace. The bracket secures the gas valve in the correct position and orientation within the burner compartment, maintaining proper alignment of the inlet/outlet piping and the manifold. Brackets are often needed during a gas valve replacement, when the original is corroded or bent, or when an installer needs the correct OEM mounting hardware to pass inspection. Using the factory bracket ensures the valve sits at the manufacturer-specified angle and clearance.

Specifications

Compatibility

Designed for the ICP/Tempstar/Heil RGS180HSAA0AAAA gas furnace and related ICP-family models that call out part 1184226. Verify against your unit's exploded parts diagram before ordering, as bracket geometry is model-specific.

Installation Guide

1. Safety First — Shut off the gas supply and disconnect power; verify zero voltage with a multimeter.
2. Access — Remove the burner-compartment service panel.
3. Document — Photograph the gas valve, bracket, and piping orientation before removing anything.
4. Remove — Disconnect the gas line union if required, then unfasten the old bracket from the valve and cabinet.
5. Install — Mount the new bracket and reattach the gas valve in the same orientation per your photo.
6. Test — Restore gas and power, leak-check all joints with soap solution, and run a heat cycle.

Signs You Need a Replacement

• Bent, cracked, or corroded original bracket
• Gas valve loose or sagging in the cabinet
• Misaligned manifold or strained gas piping
• Missing hardware after a prior valve replacement

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.