ICP Gas Valve Bracket for RGS180SDCA0AAAA — OEM Mounting | Ships Today

Overview

This is a genuine OEM gas valve mounting bracket (part number 1184226) for the ICP/Tempstar/Heil RGS180SDCA0AAAA gas furnace. The bracket secures the gas valve assembly to the burner manifold and furnace chassis, holding the valve in correct alignment with the gas line and the burner orifices. Proper bracket fit is a safety item: it keeps the valve rigid so connections do not flex, vibrate loose, or stress the inlet/outlet fittings over thousands of ignition cycles. A bent, corroded, or missing bracket can let the valve shift, strain the gas piping, and create vibration or rattling during burner operation. Replace the bracket any time it is damaged or when servicing the gas valve itself.

Specifications

Compatibility

Direct OEM replacement for the ICP RGS180SDCA0AAAA furnace and shared across many ICP-family models sold under the Tempstar, Heil, Comfortmaker, and Arcoaire brands. Verify the existing part number reads 1184226 before ordering.

Installation Guide

1. Safety First — Shut off the gas supply, disconnect power, and verify zero voltage with a multimeter.
2. Access — Remove the burner compartment service panel.
3. Document — Photograph the gas valve and bracket orientation before removing anything.
4. Remove — Disconnect the gas valve as needed, then unbolt the old bracket from the chassis.
5. Install — Mount the new bracket, reattach the valve, and torque all fittings to spec.
6. Test — Restore gas and power, leak-check every joint with soap solution, and verify burner ignition.

Signs You Need a Replacement

• Gas valve shifts or vibrates during burner operation
• Bent, cracked, or corroded bracket
• Rattling noise from the burner compartment
• Strain or movement on the gas line fittings

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.