What are the specs for this Control Board?

The correct replacement for ICP model RGS214HTAA0AAAA — Integrated Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS214HTAA0AAAA — Integrated Control | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS214HTAA0AAAA — Integrated Control | Ships Today

Name: ICP Furnace Control Board Kit for RGS214HTAA0AAAA — Integrated Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 279.50 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM control board kit (part 1183618) is the integrated furnace control (IFC) brain for the ICP / Heil / Tempstar RGS214HTAA0AAAA. It manages the ignition sequence, gas valve timing, inducer and blower relays, flame sensing, and built-in safety lockouts, and it coordinates the 24V thermostat signals into a complete, sequenced heat and fan cycle. The kit ships with the mounting hardware and instructions needed for a clean swap. Failures typically show up as a furnace that won't ignite, an inducer or blower that won't run, erratic LED fault codes, or short cycling. The on-board diagnostic LED flashes a fault code that helps confirm the board as the failed component.

Specifications

Spec	Value
OEM Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP / Heil / Tempstar
Control Voltage	24 VAC
Diagnostics	On-board LED fault codes
Fitment	OEM Direct Replacement Kit

Compatibility

Direct-fit replacement kit for the ICP / Heil / Tempstar RGS214HTAA0AAAA and related RGS-series furnaces using this integrated control. Match your existing board's part number and connector layout to confirm fitment before installing.

Installation Guide

Safety First — Disconnect power and shut off gas, then verify zero voltage with a multimeter.
Access — Remove the furnace control-compartment service panel.
Document — Photograph every harness connector and wire location before unplugging anything.
Remove — Unplug the connectors, remove the mounting screws, and lift out the old board.
Install — Mount the new board with the supplied hardware and reconnect each harness exactly per your photo.
Test — Restore power and gas, run a full heat cycle, and confirm proper ignition, blower operation, and a steady LED.

Signs You Need a Replacement

Furnace will not ignite or complete its sequence
Inducer or blower motor will not energize
Erratic or hard-fault LED diagnostic codes
Short cycling or no response to a thermostat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$279.50

Frequently Asked Questions

Does this Control Board fit my ICP RGS214HTAA0AAAA — Integrated Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS214HTAA0AAAA — Integrated Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS214HTAA0AAAA — Integrated Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu