What are the specs for this Control Board?

The correct replacement for ICP model RGS214HDAA0AAAA — OEM Integrated Module | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS214HDAA0AAAA — OEM Integrated Module | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS214HDAA0AAAA — OEM Integrated Module | Ships Today

Name: ICP Furnace Control Board Kit for RGS214HDAA0AAAA — OEM Integrated Module | Ships Today
Brand: ICP
SKU: 1183618
Price: 245.70 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (P/N 1183618) is the integrated furnace control that manages the entire heating sequence in your ICP RGS214HDAA0AAAA. It coordinates the inducer motor, hot surface igniter, gas valve, and blower timing while monitoring safety circuits such as limits and the flame sensor. A failed board is a common cause of intermittent no-heat calls, blower motors that run constantly or not at all, and flashing diagnostic LED fault codes. Supplied as a complete kit for a clean, direct replacement.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP / Tempstar / Heil
Control Voltage	24V
Application	Gas Furnace Ignition & Blower Control

Compatibility

Built for the ICP RGS214HDAA0AAAA and compatible ICP-family furnaces marketed as Tempstar, Heil, and Comfortmaker. Confirm the connector layout and board footprint against your existing control before installing.

Installation Guide

Safety First — Turn off the furnace switch and breaker; verify zero voltage with a multimeter before handling the board.
Access — Remove the blower/control compartment service panel.
Document — Photograph every wire harness and connector position before unplugging anything.
Remove — Unplug all connectors, release the mounting standoffs or screws, and lift out the old board.
Install — Mount the new board and reconnect each harness exactly per your photos.
Test — Restore power, run a full heat cycle, and confirm normal sequencing with no fault codes on the diagnostic LED.

Signs You Need a Replacement

Intermittent or complete no-heat operation.
Blower runs continuously or fails to start.
Flashing diagnostic LED fault codes pointing to the control.
Visible burnt traces, scorched relays, or a fried connector on the board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP RGS214HDAA0AAAA — OEM Integrated Module | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS214HDAA0AAAA — OEM Integrated Module | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS214HDAA0AAAA — OEM Integrated Module | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu