What are the specs for this Control Board?

The correct replacement for ICP model RGS210HFEA0AAAA — OEM 1183618 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS210HFEA0AAAA — OEM 1183618 | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS210HFEA0AAAA — OEM 1183618 | Ships Today

Name: ICP Furnace Control Board Kit for RGS210HFEA0AAAA — OEM 1183618 | Ships Today
Brand: ICP
SKU: 1183618
Price: 214.50 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part number 1183618) is the integrated furnace control (IFC) for the ICP/Heil/Tempstar RGS210HFEA0AAAA gas furnace. The board is the brain of the system: it sequences the inducer, ignitor, and gas valve, monitors the pressure switch and limit safeties, times the blower on/off delays, and drives the heating and cooling cycles from the thermostat inputs. It also reports fault codes through its diagnostic LED. When the board fails, the furnace may be completely dead, ignore thermostat calls, mis-time the blower, or flash error codes. Supplied as a kit with mounting hardware, it restores full, code-correct furnace operation.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP / Heil / Tempstar
Function	Ignition sequencing, blower timing, safety monitoring, diagnostics
Fit	OEM Replacement

Compatibility

Built for the ICP/Heil/Tempstar RGS210HFEA0AAAA and other RGS-family gas furnaces specifying control board kit 1183618. Confirm the part number and connector layout against your existing board before ordering, as furnace control boards are model-specific.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the furnace control/service panel to expose the board.
Document — Photograph every connector and wire harness position before unplugging anything.
Remove — Unplug the harnesses, unscrew the board from its standoffs, and lift it out.
Install — Mount the new board with the supplied hardware and reconnect each harness to the matching connector per your photo.
Test — Restore power and run a full heat and fan cycle, confirming correct sequencing and no diagnostic fault codes.

Signs You Need a Replacement

Furnace is completely unresponsive to thermostat calls.
Blower runs constantly or with incorrect on/off timing.
Diagnostic LED flashes a hard-fault or board-failure code.
Visible burn marks, swollen components, or a failed relay on the board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$214.50

Frequently Asked Questions

Does this Control Board fit my ICP RGS210HFEA0AAAA — OEM 1183618 | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS210HFEA0AAAA — OEM 1183618 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS210HFEA0AAAA — OEM 1183618 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu