What are the specs for this Control Board?

The correct replacement for ICP model RGS102LRBB0AAA — Integrated Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102LRBB0AAA — Integrated Ignition Control | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS102LRBB0AAA — Integrated Ignition Control | Ships Today

Name: ICP Furnace Control Board Kit for RGS102LRBB0AAA — Integrated Ignition Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 246.94 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part number 1183618) is the integrated furnace control (IFC) brain of the ICP RGS102LRBB0AAA. It sequences the entire heating cycle — energizing the inducer, proving pressure switches, firing the hot surface igniter, opening the gas valve, monitoring flame, and timing blower on/off delays. It also manages safety lockouts and runs the diagnostic LED fault codes. A failed board shows up as intermittent operation, no response to thermostat calls, blower running constantly, or repeated lockouts that no single component swap resolves.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP
Control Voltage	24V
Functions	Ignition sequencing, blower timing, flame sense, diagnostics

Compatibility

Direct OEM fit for the ICP / Tempstar / Heil RGS102LRBB0AAA gas furnace. Supersedes prior board revisions specified for this chassis — confirm the connector layout and mounting against your existing board before installing.

Installation Guide

Safety First — Disconnect electrical power and shut off gas, then verify zero voltage with a multimeter.
Access — Remove the furnace control-compartment door to expose the board.
Document — Photograph every connector and the dip-switch settings before disconnecting.
Remove — Unplug each harness, release the board standoffs, and lift out the old board.
Install — Mount the new board, replicate any dip-switch settings, and reseat each connector per your photos.
Test — Restore power and gas and run a full heat cycle, confirming the diagnostic LED reports normal operation.

Signs You Need a Replacement

Furnace does not respond to thermostat calls
Blower runs continuously or won't start
Repeated lockouts with no fault in igniter, valve, or switches
Diagnostic LED dark or flashing a hard-fault code

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$246.94

Frequently Asked Questions

Does this Control Board fit my ICP RGS102LRBB0AAA — Integrated Ignition Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS102LRBB0AAA — Integrated Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS102LRBB0AAA — Integrated Ignition Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu