What are the specs for this Control Board?

The correct replacement for ICP model RGS102LECB0AAA — OEM Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102LECB0AAA — OEM Ignition Control | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS102LECB0AAA — OEM Ignition Control | Ships Today

Name: ICP Furnace Control Board Kit for RGS102LECB0AAA — OEM Ignition Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 246.94 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part number 1183618) is the integrated furnace control (IFC) that runs the entire heating sequence on your ICP Tempstar Heil RGS102LECB0AAA. It manages the inducer, hot surface igniter, gas valve, blower timing, and flame sensing, and it interprets safety inputs from the limit and pressure switches. When the board fails you may see no response to a thermostat call, blower or inducer running nonstop, flashing diagnostic LED fault codes, or intermittent no-heat lockouts. Supplied as a complete kit with the hardware and instructions needed for a clean swap.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP (Tempstar / Heil)
Control Voltage	24 VAC
Functions	Ignition, Blower & Inducer Timing, Flame Sense, Safety Monitoring
Fit	OEM Direct Replacement Kit

Compatibility

Direct OEM replacement for the ICP Tempstar Heil RGS102LECB0AAA furnace and other ICP-family furnaces that specify control board kit 1183618. Match your existing board's part number and connector layout before installing to ensure correct wiring and timing.

Installation Guide

Safety First — Disconnect power and gas at the furnace; verify zero voltage with a multimeter before handling the board.
Access — Remove the furnace control/blower compartment panel.
Document — Photograph every plug and wire on the existing board before disconnecting; note any dip-switch or jumper settings.
Remove — Unplug each harness, release the board's mounting standoffs or screws, and lift out the old control.
Install — Mount the new board, transfer any required jumper/dip settings, and reconnect every harness exactly per your photo.
Test — Restore power and gas, run a full heat cycle, and confirm ignition, blower timing, and a normal diagnostic LED with no fault codes.

Signs You Need a Replacement

No response from the furnace on a call for heat
Blower or inducer motor runs continuously
Flashing LED fault/diagnostic codes at the board
Intermittent no-heat lockouts with no other failed component

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$246.94

Frequently Asked Questions

Does this Control Board fit my ICP RGS102LECB0AAA — OEM Ignition Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS102LECB0AAA — OEM Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS102LECB0AAA — OEM Ignition Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu