What are the specs for this Control Board?

The correct replacement for ICP model RGS102HTCB0AAA — OEM Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HTCB0AAA — OEM Ignition Control | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS102HTCB0AAA — OEM Ignition Control | Ships Today

Name: ICP Furnace Control Board Kit for RGS102HTCB0AAA — OEM Ignition Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 240.44 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part 1183618) is the electronic brain of the ICP Tempstar Heil RGS102HTCB0AAA gas furnace. It sequences the entire heat cycle — energizing the inducer, proving pressure switches and limits, firing the hot surface igniter, opening the gas valve, and timing blower-on and blower-off delays — while monitoring flame and safety inputs and flashing diagnostic fault codes. Because it controls every safety interlock, a failed board can leave the furnace completely dead, stuck in lockout, or cycling erratically. Failure symptoms include no response on a heat call, blower or inducer that won't start, repeated lockouts with diagnostic LED codes, and visible burns, corrosion, or relay damage on the board.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Ignition Control Board Kit
Brand	ICP / Tempstar / Heil
Application	Gas Furnace Ignition & Blower Control
Fitment	OEM Replacement

Compatibility

Engineered for the ICP Tempstar Heil RGS102HTCB0AAA gas furnace and related ICP-family furnaces using this integrated control board. Confirm the board part number, connector layout, and mounting against your original before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the furnace control-compartment service panel.
Document — Photograph every wire harness and connector position on the old board before unplugging.
Remove — Unplug each connector, remove the board's mounting screws or standoffs, and lift it out.
Install — Mount the new board, reconnect every harness to its matching terminal per your photo, and verify each plug is fully seated.
Test — Restore power, run a full heat cycle, and confirm proper ignition, blower timing, and no fault codes on the diagnostic LED.

Signs You Need a Replacement

Furnace is completely unresponsive on a heat call
Inducer or blower will not energize
Repeated lockouts with diagnostic LED fault codes
Visible scorching, corrosion, or failed relays on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$240.44

Frequently Asked Questions

Does this Control Board fit my ICP RGS102HTCB0AAA — OEM Ignition Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS102HTCB0AAA — OEM Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS102HTCB0AAA — OEM Ignition Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu