What are the specs for this Control Board?

The correct replacement for ICP model RGS102HTBA0AAA – Integrated Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HTBA0AAA – Integrated Ignition | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS102HTBA0AAA – Integrated Ignition | Ships Today

Name: ICP Furnace Control Board Kit for RGS102HTBA0AAA – Integrated Ignition | Ships Today
Brand: ICP
SKU: 1183618
Price: 245.70 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part number 1183618) is the electronic brain of the ICP/Tempstar/Heil RGS102HTBA0AAA gas furnace. It manages the entire heating sequence — igniter timing, gas valve operation, inducer and blower control, flame sensing, and safety lockouts. When a control board fails, the furnace may short-cycle, fail to ignite, run the blower continuously, or stop responding to the thermostat entirely. This complete kit ships with the mounting hardware and instructions needed for a straightforward swap.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP
Function	Ignition, Blower & Safety Control
Application	Gas Furnace

Compatibility

Direct OEM fit for the ICP / Tempstar / Heil / Comfortmaker RGS102HTBA0AAA furnace. Confirm your existing board's part number and connector layout against the replacement before installing.

Installation Guide

Safety First – Disconnect power and shut off gas; verify zero voltage with a multimeter.
Access – Remove the furnace control/service panel.
Document – Photograph every wire harness and plug position on the old board.
Remove – Unplug all connectors and unscrew the old board from its standoffs.
Install – Mount the new board and reconnect each harness exactly per your photos.
Test – Restore gas and power, then run a full heat cycle to confirm ignition, blower, and shutdown sequence.

Signs You Need a Replacement

Furnace ignores thermostat calls or short-cycles
No igniter or inducer activity on a heat call
Blower runs continuously or never starts
Error/diagnostic LED flashes a board-fault code

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP RGS102HTBA0AAA – Integrated Ignition | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS102HTBA0AAA – Integrated Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS102HTBA0AAA – Integrated Ignition | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu