What are the specs for this Control Board?

The correct replacement for ICP model RGS102HEBA0AAA – OEM Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102HEBA0AAA – OEM Ignition Control | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS102HEBA0AAA – OEM Ignition Control | Ships Today

Name: ICP Furnace Control Board Kit for RGS102HEBA0AAA – OEM Ignition Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 227.44 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM furnace control board kit, part number 1183618, for the ICP / Tempstar / Heil RGS102HEBA0AAA gas furnace. The integrated furnace control board is the brain of the appliance: it manages the ignition sequence, sequences the inducer and blower, monitors safety limits and flame sense, and runs the diagnostic LED fault codes. A failed board can cause no-heat conditions, blower or inducer that won't run, intermittent lockouts, or erratic operation that mimics other component failures. Supplied as a complete kit with mounting hardware and instructions, it is the definitive fix once you have confirmed the board itself is at fault.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP / Tempstar / Heil
Fits Model	RGS102HEBA0AAA
Function	Ignition / Blower / Safety Control
Fit	OEM Direct Replacement

Compatibility

Direct OEM replacement for the ICP / Tempstar / Heil RGS102HEBA0AAA furnace. Control board kit 1183618 is used across several ICP-family furnaces; confirm your current board's part number before ordering to ensure an exact match.

Installation Guide

Safety First – Disconnect electrical power at the furnace switch and breaker. Verify zero voltage with a multimeter.
Access – Remove the furnace control / blower compartment service panel.
Document – Photograph every wire and connector on the existing board before removing anything.
Remove – Unplug all harness connectors, remove the mounting screws, and lift out the old control board.
Install – Mount the new board, then transfer each connector exactly as photographed. Verify low-voltage and line-voltage plugs are fully seated.
Test – Restore power, run a full heat cycle, and confirm correct ignition, blower timing, and no fault codes on the diagnostic LED.

Signs You Need a Replacement

No response on a heat call – no inducer, no igniter, no blower.
Repeated ignition lockouts with no other failed component found.
Diagnostic LED dark, frozen, or flashing an internal-control fault code.
Visible burnt traces, scorched relays, or corrosion on the board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$227.44

Frequently Asked Questions

Does this Control Board fit my ICP RGS102HEBA0AAA – OEM Ignition Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS102HEBA0AAA – OEM Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS102HEBA0AAA – OEM Ignition Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu