What are the specs for this Control Board?

The correct replacement for ICP model RGS091LFCB0AAA — Integrated Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS091LFCB0AAA — Integrated Ignition Control | Ships Today.

ICP

ICP Furnace Control Board Kit for RGS091LFCB0AAA — Integrated Ignition Control | Ships Today

Name: ICP Furnace Control Board Kit for RGS091LFCB0AAA — Integrated Ignition Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 207.94 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part #1183618) is the brain of your ICP, Heil, and Tempstar RGS091LFCB0AAA gas furnace. The integrated furnace control sequences the inducer, igniter, gas valve, and blower, monitors flame sense and limit/pressure switches, and runs the diagnostic LED fault codes. When it fails you may see a dead furnace, blower that won't shut off, igniter that never energizes, or erratic flashing fault codes. Supplied as a complete kit with the correct board for a clean swap.

Specifications

Spec	Value
OEM Part Number	1183618
Type	Integrated Furnace Control Board
Brand	ICP / Heil / Tempstar
Function	Ignition, blower & safety sequencing
Format	Replacement kit

Compatibility

Direct-fit replacement for the ICP/Heil/Tempstar RGS091LFCB0AAA gas furnace and matching chassis using the same control platform. Verify your full model and serial number prior to ordering.

Installation Guide

Safety First — Disconnect power at the switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the blower-compartment service panel.
Document — Photograph every wire and connector on the existing board before disconnecting.
Remove — Unplug all harnesses, release the board standoffs/screws, and lift out the old control.
Install — Mount the new board and reconnect each harness exactly per your photo.
Test — Restore power, run a full heat cycle, and confirm the diagnostic LED shows normal operation.

Signs You Need a Replacement

Furnace completely dead with no diagnostic LED
Blower runs continuously or fails to start
Igniter or gas valve never energizes on a heat call
Erratic or nonsensical LED fault codes

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board Kit fo...

$207.94

Frequently Asked Questions

Does this Control Board fit my ICP RGS091LFCB0AAA — Integrated Ignition Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS091LFCB0AAA — Integrated Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS091LFCB0AAA — Integrated Ignition Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu