What are the specs for this Control Board?

The correct replacement for ICP model WPG3604130RKC1 — Integrated Ignition Control Module | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3604130RKC1 — Integrated Ignition Control Module | Ships Today.

ICP

ICP Furnace Control Board for WPG3604130RKC1 — Integrated Ignition Control Module | Ships Today

Name: ICP Furnace Control Board for WPG3604130RKC1 — Integrated Ignition Control Module | Ships Today
Brand: ICP
SKU: 1178358
Price: 194.94 USD
Availability: InStock

SKU: 1178358 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM integrated furnace control board for the ICP / Tempstar / Heil WPG3604130RKC1 packaged gas/electric unit, covering circuit board part 1178358 and ignition control module 1177661. The control board is the brain of the furnace section: it sequences the ignition cycle, monitors the flame signal, energizes the inducer and gas valve, controls blower timing, and runs continuous safety diagnostics. When this board fails, the furnace may not respond to a heat call, may lock out after a few ignition attempts, short-cycle, or throw a diagnostic LED fault code. Replacing it with the correct OEM board restores reliable, code-compliant operation and the original safety logic.

Specifications

Spec	Value
Part Number	1178358 (Circuit Board), 1177661 (Ignition Control Module)
Type	Integrated Furnace Control / Ignition Module
Brand	ICP (Heil / Tempstar / Comfortmaker)
Control Voltage	24V
Ignition Type	Hot Surface Ignition
Fitment	OEM Direct Replacement

Compatibility

Engineered for the ICP/Tempstar/Heil WPG3604130RKC1 weatherized packaged gas/electric unit and other models that originally shipped with circuit board 1178358 or ignition control module 1177661. Always confirm the part number printed on your existing board before ordering.

Installation Guide

Safety First — Disconnect power at the unit disconnect and verify zero voltage with a multimeter before touching any wiring.
Access — Remove the control/blower compartment service panel.
Document — Photograph every wire and connector position on the existing board before disconnecting anything.
Remove — Unplug the wiring harnesses and remove the board mounting screws, then lift out the old board.
Install — Mount the new board to the same standoffs and reconnect every harness exactly per your photo.
Test — Restore power, initiate a heat call, and confirm a full ignition sequence and clean blower changeover.

Signs You Need a Replacement

No response to a thermostat heat call with 24V present.
Furnace locks out after repeated failed ignition attempts.
Diagnostic LED flashing a hard-lockout or control fault code.
Inducer, igniter, or blower not energizing in proper sequence.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WP...

$194.94

Frequently Asked Questions

Does this Control Board fit my ICP WPG3604130RKC1 — Integrated Ignition Control Module | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WPG3604130RKC1 — Integrated Ignition Control Module | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WPG3604130RKC1 — Integrated Ignition Control Module | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu