What are the specs for this Control Board?

The correct replacement for ICP model WPG3244060LKC1 — Integrated Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3244060LKC1 — Integrated Ignition Control | Ships Today.

ICP

ICP Furnace Control Board for WPG3244060LKC1 — Integrated Ignition Control | Ships Today

Name: ICP Furnace Control Board for WPG3244060LKC1 — Integrated Ignition Control | Ships Today
Brand: ICP
SKU: 1178358
Price: 246.94 USD
Availability: InStock

SKU: 1178358 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM integrated control board is the brain of the ICP WPG3244060LKC1 packaged gas/electric unit. It manages the entire heating sequence — receiving the 24V thermostat call, energizing the inducer, proving the pressure switch, firing the hot surface igniter, opening the gas valve, monitoring flame, and timing the blower on/off delays. It also coordinates safety lockouts from the limit and rollout switches. This listing covers the circuit board (OEM 1178358) and its companion ignition control module (OEM 1177661). When this board fails you typically see no ignition sequence at all, random no-heat lockouts, an inducer that runs but never lights, or a board with a continuously flashing fault LED.

Specifications

Spec	Value
Part Number	1178358 (circuit board), 1177661 (ignition control module)
Type	Integrated furnace ignition control board
Brand	ICP / Tempstar / Heil
Control Voltage	24 VAC
Functions	Ignition sequencing, blower timing, safety monitoring, diagnostic LED

Compatibility

Direct-fit replacement for the ICP WPG3244060LKC1 and related ICP, Tempstar, Heil, and Comfortmaker packaged gas/electric units using this integrated ignition control. Verify the board layout and connector positions match your original before installing.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter at the board.
Access — Remove the control/blower compartment service panel.
Document — Photograph every wire harness and connector position on the old board before unplugging.
Remove — Unplug each connector, release the mounting standoffs or screws, and lift the board out.
Install — Mount the new board, then reconnect every harness to the matching terminal per your photo.
Test — Restore power and run a full heat cycle, watching for correct sequencing and a steady (no-fault) diagnostic LED.

Signs You Need a Replacement

No heating sequence — inducer, igniter, and gas valve never energize.
Unit lights then locks out repeatedly on a flame or limit fault.
Blower fails to start or runs continuously regardless of the call.
Diagnostic LED is dark or flashing a hard-fault/internal-error code.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WP...

$246.94

Frequently Asked Questions

Does this Control Board fit my ICP WPG3244060LKC1 — Integrated Ignition Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WPG3244060LKC1 — Integrated Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WPG3244060LKC1 — Integrated Ignition Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu