What are the specs for this Control Board?

The correct replacement for ICP model WFSR080C060A1 — Integrated Ignition Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR080C060A1 — Integrated Ignition Control | Ships Today.

ICP

ICP Furnace Control Board for WFSR080C060A1 — Integrated Ignition Control | Ships Today

Name: ICP Furnace Control Board for WFSR080C060A1 — Integrated Ignition Control | Ships Today
Brand: ICP
SKU: 1184783
Price: 218.40 USD
Availability: InStock

SKU: 1184783 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM integrated furnace control board (OEM 1184783) is the brain of your ICP WFSR080C060A1 gas furnace. It manages the entire heating sequence — igniter timing, gas valve control, inducer and blower operation, and the safety logic that monitors limits, pressure switches, and flame. When the board fails you may see no response to a heat call, erratic cycling, blower-only operation, or fault codes flashing on the diagnostic LED.

Specifications

Spec	Value
Part Number	1184783
Type	Integrated Furnace Control Board
Function	Ignition, blower & safety sequencing
Diagnostics	On-board fault-code LED
Brand	ICP / Heil / Tempstar
Application	Gas Furnace
Fitment	OEM

Compatibility

Direct OEM replacement for the integrated control board in the ICP/Heil/Tempstar WFSR080C060A1 furnace. This board is shared across several ICP-family WFSR-series models — match the OEM part number 1184783 to confirm fit.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the furnace control-compartment service panel.
Document — Photograph every wire harness and connector position before disconnecting.
Remove — Unplug all connectors, remove the mounting screws, and lift out the old board.
Install — Mount the new board, transfer any jumpers or settings, and reconnect each harness exactly per your photos.
Test — Restore power, run a full heat cycle, and confirm proper ignition, blower, and fault-free LED status.

Signs You Need a Replacement

No response from the furnace when the thermostat calls for heat
Diagnostic LED flashing a hard-fault or control-fault code
Blower or inducer runs continuously or fails to start
Visible burnt traces, scorch marks, or failed relays on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$218.40

Frequently Asked Questions

Does this Control Board fit my ICP WFSR080C060A1 — Integrated Ignition Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFSR080C060A1 — Integrated Ignition Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFSR080C060A1 — Integrated Ignition Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu