What are the specs for this Control Board?

The correct replacement for ICP model WFSR060A042A1 — Integrated Ignition | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFSR060A042A1 — Integrated Ignition | Ships Today.

ICP

ICP Furnace Control Board for WFSR060A042A1 — Integrated Ignition | Ships Today

Name: ICP Furnace Control Board for WFSR060A042A1 — Integrated Ignition | Ships Today
Brand: ICP
SKU: 1184783
Price: 246.94 USD
Availability: InStock

SKU: 1184783 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM integrated furnace control board (part #1184783) is the brain of your ICP/Heil/Tempstar WFSR060A042A1 gas furnace. It manages the ignition sequence, monitors safety interlocks, sequences the inducer and blower, and communicates with the thermostat. When this board fails the furnace may not ignite, may lock out after a few attempts, run the blower continuously, or show diagnostic fault codes on its onboard LED. Replacing a degraded control board restores reliable, safe heating operation.

Specifications

Spec	Value
Part Number	1184783
Type	Integrated Furnace Ignition Control Board
Brand	ICP / Heil / Tempstar
Function	Ignition sequencing, blower/inducer control, safety monitoring, diagnostics
Diagnostics	Onboard LED fault codes

Compatibility

Direct-fit OEM replacement for the ICP/Heil/Tempstar WFSR060A042A1 furnace and matching WFSR-series units that use the same control platform. Compare your existing board's part number and connector layout before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the furnace control compartment service panel.
Document — Photograph every wire harness and connector position before disconnecting.
Remove — Unplug all connectors, remove the mounting screws, and lift out the old board.
Install — Mount the new board, then reconnect each harness to its matching terminal exactly per your photo.
Test — Restore power and watch a full ignition cycle: inducer, igniter, flame, then blower.

Signs You Need a Replacement

Furnace fails to ignite or locks out repeatedly
Blower runs constantly or won't start at all
Erratic operation or no response to the thermostat
Diagnostic LED flashing a control-fault code, or visible scorching/corrosion on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$246.94

Frequently Asked Questions

Does this Control Board fit my ICP WFSR060A042A1 — Integrated Ignition | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFSR060A042A1 — Integrated Ignition | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFSR060A042A1 — Integrated Ignition | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu