What are the specs for this Control Board?

The correct replacement for ICP model WFMR070A036A1 — CEPL130438-01 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR070A036A1 — CEPL130438-01 | Ships Today.

ICP

ICP Furnace Control Board for WFMR070A036A1 — CEPL130438-01 | Ships Today

Name: ICP Furnace Control Board for WFMR070A036A1 — CEPL130438-01 | Ships Today
Brand: ICP
SKU: 1176943
Price: 245.70 USD
Availability: InStock

SKU: 1176943 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM integrated furnace control board (part number 1176943, circuit board CEPL130438-01) is the factory ignition and control module for the ICP/Heil/Tempstar WFMR070A036A1 gas furnace. The control board is the brain of the furnace: it manages the ignition sequence, sequences the inducer and blower motors, monitors safety switches and flame, and energizes the gas valve and hot surface igniter. When the board fails you'll see erratic behavior — the furnace won't start, the inducer or blower runs continuously, ignition lockouts, or blinking diagnostic LED fault codes. A failed control board is a frequent cause of intermittent no-heat and short-cycling complaints on these furnaces.

Specifications

Spec	Value
Part Number	1176943
Board Number	CEPL130438-01
Type	Integrated Furnace Control
Brand	ICP / Heil / Tempstar
Control Voltage	24V
Application	Gas Furnace Ignition & Control

Compatibility

Directly fits the ICP/Heil/Tempstar/Comfortmaker WFMR070A036A1 furnace and related WFMR-series furnaces using control board CEPL130438-01. Match the CEPL number printed on your existing board before ordering.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
Access — Remove the furnace control compartment service panel.
Document — Photograph every wire harness and terminal connection before disconnecting.
Remove — Unplug the harnesses, remove the mounting screws, and lift out the old board.
Install — Mount the new board and reconnect each harness exactly per your photos.
Test — Restore power, initiate a call for heat, and verify a normal ignition sequence with no fault codes.

Signs You Need a Replacement

Furnace will not ignite or repeatedly locks out.
Inducer or blower motor runs continuously or won't start.
Blinking diagnostic LED fault codes on the board.
Visible burnt traces, scorched relays, or a melted connector.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP WFMR070A036A1 — CEPL130438-01 | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFMR070A036A1 — CEPL130438-01 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFMR070A036A1 — CEPL130438-01 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu