What are the specs for this Control Board?

The correct replacement for ICP model WFHR060B024A1 — CEPL130438-01 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFHR060B024A1 — CEPL130438-01 | Ships Today.

ICP

ICP Furnace Control Board for WFHR060B024A1 — CEPL130438-01 | Ships Today

Name: ICP Furnace Control Board for WFHR060B024A1 — CEPL130438-01 | Ships Today
Brand: ICP
SKU: 1176943
Price: 214.50 USD
Availability: InStock

SKU: 1176943 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM integrated furnace control board (part number 1176943, board ID CEPL130438-01) is the brain of the ICP / Tempstar / Heil WFHR060B024A1. It sequences the entire heat cycle — reading the thermostat call, energizing the inducer, proving the pressure switch, firing the hot surface igniter, opening the gas valve, monitoring the flame sensor, and timing the blower on and off. It also runs the diagnostic LED flash codes used to troubleshoot the furnace. When the board fails the furnace may be completely dead, get stuck on the inducer, never command ignition, short-cycle, or throw erratic flash codes. Replacing the control board restores correct ignition sequencing and safety supervision.

Specifications

Spec	Value
Part Number	1176943
Board ID	CEPL130438-01
Type	Integrated Furnace Control Board
Brand	ICP (Tempstar / Heil / Comfortmaker)
Control Voltage	24 VAC
Application	Gas Furnace Ignition & Blower Control
Fitment	OEM Replacement

Compatibility

Engineered as the direct factory replacement for the ICP-family model WFHR060B024A1 and other ICP, Tempstar, Heil, and Comfortmaker furnaces that use control board CEPL130438-01. Verify the CEPL number printed on your existing board matches before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the control-compartment service panel.
Document — Photograph every connector and wire location on the old board before removing anything.
Remove — Unplug the harnesses, release the board standoffs or screws, and lift out the failed board.
Install — Mount the new board and reconnect each harness in the exact position shown in your photo.
Test — Restore power and watch a full heat cycle — inducer, igniter, gas valve, flame proof, and blower — confirming normal flash codes.

Signs You Need a Replacement

Furnace completely unresponsive to a heat call
Inducer runs but ignition is never commanded
Erratic short-cycling or random shutdowns
No or nonsensical diagnostic LED flash codes

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$214.50

Frequently Asked Questions

Does this Control Board fit my ICP WFHR060B024A1 — CEPL130438-01 | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFHR060B024A1 — CEPL130438-01 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFHR060B024A1 — CEPL130438-01 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu