What are the specs for this Control Board?

The correct replacement for ICP model WFEL135D060A1 - OEM 1187101 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFEL135D060A1 - OEM 1187101 | Ships Today.

ICP

ICP Furnace Control Board for WFEL135D060A1 - OEM 1187101 | Ships Today

Name: ICP Furnace Control Board for WFEL135D060A1 - OEM 1187101 | Ships Today
Brand: ICP
SKU: 1187101
Price: 220.94 USD
Availability: InStock

SKU: 1187101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the genuine OEM control board (part number 1187101) for the ICP / Heil / Tempstar WFEL135D060A1. The control board orchestrates the entire heating sequence - it powers the igniter, energizes the gas valve, runs the blower, and monitors the limit and flame-sense safety circuits while reporting faults on its diagnostic LED. A failed board can cause a no-heat condition, repeated lockouts, a blower that runs nonstop or never starts, or erratic flash codes. Boards fail from burnt relays, heat-stressed solder joints, and voltage surges. The exact OEM replacement restores correct sequencing and all factory safety logic.

Specifications

Spec	Value
Part Number	1187101
Type	Integrated Furnace Control Board
Brand	ICP / Heil / Tempstar
Fitment	OEM exact-fit
Fits Model	WFEL135D060A1

Compatibility

Direct OEM replacement for the ICP / Heil / Tempstar WFEL135D060A1. The harness connectors and mounting standoffs match the original board for a plug-and-play installation.

Installation Guide

Safety First - Disconnect power at the breaker and verify zero voltage with a multimeter.
Access - Remove the service panel to reach the control board.
Document - Photograph every harness and connector location before unplugging anything.
Remove - Unplug each harness, release the standoffs or screws, and lift out the old board.
Install - Seat the new board on the standoffs and reconnect each harness exactly per your photo.
Test - Restore power, confirm a normal LED status code, and run a complete ignition and heat cycle.

Signs You Need a Replacement

No response on a call for heat or repeated safety lockouts
Erratic or continuous LED fault flashing
Blower runs constantly or will not energize
Visible burnt relays, scorched traces, or corrosion on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$220.94

Frequently Asked Questions

Does this Control Board fit my ICP WFEL135D060A1 - OEM 1187101 | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFEL135D060A1 - OEM 1187101 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFEL135D060A1 - OEM 1187101 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu