What are the specs for this Control Board?

The correct replacement for ICP model WFEL110C060A1 — Genuine OEM | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFEL110C060A1 — Genuine OEM | Ships Today.

ICP

ICP Furnace Control Board for WFEL110C060A1 — Genuine OEM | Ships Today

Name: ICP Furnace Control Board for WFEL110C060A1 — Genuine OEM | Ships Today
Brand: ICP
SKU: 1187101
Price: 245.70 USD
Availability: InStock

SKU: 1187101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM integrated furnace control board (part number 1187101) is the brain of your ICP Tempstar Heil WFEL110C060A1 gas furnace. It sequences the entire heating cycle — energizing the draft inducer, verifying the pressure switch, firing the hot surface igniter, opening the gas valve, timing the blower on/off delays, and continuously monitoring the flame sensor and limit safeties. It also runs cooling and continuous-fan modes. When the board's relays, microprocessor, or onboard fuse fail, the furnace may be completely unresponsive, short-cycle, or throw error-code flash patterns at the diagnostic LED. Replacing the board with the correct OEM part restores reliable, code-compliant operation.

Specifications

Spec	Value
Part Number	1187101
Type	Integrated Furnace Control Board
Brand	ICP (Tempstar / Heil)
Function	Ignition, blower, safety, and mode control
Diagnostics	Onboard LED fault-code indicator
Fit	Genuine OEM

Compatibility

Engineered as a direct factory replacement for the ICP Tempstar Heil WFEL110C060A1 gas furnace. The 1187101 control board is used across comparable ICP-family (Comfortmaker, Arcoaire, Heil, Tempstar) single-stage furnace platforms. Verify the board's part number and connector layout against your existing control before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, and verify zero voltage with a multimeter before handling the board.
Access — Remove the blower-compartment service panel to expose the control board.
Document — Photograph every harness connector and wire position before disconnecting — connectors are keyed but labeling helps.
Remove — Unplug all connectors, release the mounting standoffs/screws, and lift out the failed board.
Install — Seat the new 1187101 board on the standoffs and reconnect every harness exactly per your photos.
Test — Restore power, run a full heat and cool cycle, and confirm the diagnostic LED shows normal operation.

Signs You Need a Replacement

Furnace completely dead despite good incoming power and transformer voltage
Diagnostic LED flashing a hard-fault or board-failure code
Inducer, igniter, or blower fails to energize in the correct sequence
Burnt smell, scorched relay, or visibly damaged components on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP WFEL110C060A1 — Genuine OEM | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFEL110C060A1 — Genuine OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFEL110C060A1 — Genuine OEM | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu