What are the specs for this Control Board?

The correct replacement for ICP model WFEL090B024A1 — OEM 1187101 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFEL090B024A1 — OEM 1187101 | Ships Today.

ICP

ICP Furnace Control Board for WFEL090B024A1 — OEM 1187101 | Ships Today

Name: ICP Furnace Control Board for WFEL090B024A1 — OEM 1187101 | Ships Today
Brand: ICP
SKU: 1187101
Price: 245.70 USD
Availability: InStock

SKU: 1187101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The ICP control board (OEM part #1187101) is the integrated furnace control (IFC) that runs the ignition sequence, blower timing, and safety logic on your ICP/Heil/Tempstar WFEL090B024A1 gas furnace. It reads the pressure switch, limit, and flame sensor, then sequences the inducer, hot surface igniter, gas valve, and blower in order. A failed board commonly causes no ignition, short cycling, a continuously running blower, or a flashing fault LED. If the furnace hums but never lights, the control board is a leading suspect.

Specifications

Spec	Value
Part Number	1187101
Type	Integrated Furnace Control (IFC)
Brand	ICP (Heil / Tempstar)
Function	Ignition, blower & safety control
Diagnostics	Fault-code LED
Fit	OEM direct replacement

Compatibility

Direct-fit replacement for the ICP, Heil, and Tempstar WFEL090B024A1 furnace and other ICP-family WFEL090 gas furnaces using board 1187101. Confirm your existing board carries the same part number before ordering.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the lower service panel to expose the control board.
Document — Photograph every wire and connector position before disconnecting anything.
Remove — Unplug each harness, release the board mounting tabs/screws, and lift the old board out.
Install — Mount the new 1187101 board and reconnect every harness exactly per your photo.
Test — Restore power and run a full heat cycle; confirm proper ignition, blower timing, and no fault codes.

Signs You Need a Replacement

Furnace will not ignite or respond to a heat call
Blower runs continuously or never starts
Flashing or steady fault LED on the board
Burnt relays, scorch marks, or corrosion on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP WFEL090B024A1 — OEM 1187101 | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFEL090B024A1 — OEM 1187101 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFEL090B024A1 — OEM 1187101 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu