What are the specs for this Control Board?

The correct replacement for ICP model WFAR100C048B1 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFAR100C048B1 | Ships Today.

ICP

ICP Furnace Control Board for WFAR100C048B1 | Ships Today

Name: ICP Furnace Control Board for WFAR100C048B1 | Ships Today
Brand: ICP
SKU: 1184783
Price: 207.94 USD
Availability: InStock

SKU: 1184783 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM furnace control board (part #1184783, CONTROL BOARD) is the integrated ignition and blower control module for the ICP/Heil/Tempstar WFAR100C048B1. It is the brain of the furnace: it sequences the ignition cycle, fires the hot surface igniter, opens the gas valve, monitors flame and the pressure/limit safety chain, and times the blower on and off. When the board fails, symptoms range from a completely dead furnace to no ignition, no blower, short cycling, or repeated lockouts with diagnostic LED fault codes. Boards are damaged by power surges, moisture, failed components downstream, or simple age. This OEM board matches the factory firmware, relay layout, and connector pinout so the wiring harness lands exactly where it came off.

Specifications

Spec	Value
Part Number	1184783
Type	Integrated Furnace Control Board
Brand	ICP / Heil / Tempstar
Function	Ignition, Blower & Safety Control
Application	Gas Furnace
Fitment	OEM

Compatibility

Engineered for the ICP/Heil/Tempstar WFAR100C048B1 and matching WFAR-series furnaces that shipped with this integrated control board. Match your existing board's part number and connector layout before installing.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
Access — Remove the control compartment service panel.
Document — Photograph every wire and connector on the old board before unplugging.
Remove — Unplug the harnesses, remove the mounting screws, and lift out the failed board.
Install — Mount the new board and reconnect every harness to the matching terminal per your photo.
Test — Restore power and run a full heat cycle, confirming ignition, flame proving, and blower timing while watching the diagnostic LED.

Signs You Need a Replacement

Furnace is completely dead with power present
No ignition or blower despite a valid heat call
Diagnostic LED shows a control or internal fault code
Random short cycling or lockouts that other parts don't fix

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for WF...

$207.94

Frequently Asked Questions

Does this Control Board fit my ICP WFAR100C048B1 | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFAR100C048B1 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFAR100C048B1 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu