What are the specs for this Control Board?

The correct replacement for ICP model RGS240SFEA0AAAA — OEM Kit 1183618 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS240SFEA0AAAA — OEM Kit 1183618 | Ships Today.

ICP

ICP Furnace Control Board for RGS240SFEA0AAAA — OEM Kit 1183618 | Ships Today

Name: ICP Furnace Control Board for RGS240SFEA0AAAA — OEM Kit 1183618 | Ships Today
Brand: ICP
SKU: 1183618
Price: 218.40 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM integrated furnace control board kit (part number 1183618) for the ICP / Tempstar / Heil RGS240SFEA0AAAA gas furnace. The control board is the brain of the furnace — it manages the ignition sequence, sequences the inducer and blower motors, monitors the flame and limit switches, and runs the built-in safety lockouts and diagnostic LED fault codes. When this board fails, the furnace typically will not respond to a thermostat call, gets stuck in a single stage of the ignition sequence, or short-cycles. Because it ships as a complete kit, it includes the mounting hardware and wiring connectors needed for a clean replacement.

Specifications

Spec	Value
OEM Part Number	1183618 (Kit Control Board)
Type	Integrated Furnace Control Board
Brand	ICP (Tempstar / Heil)
Control Voltage	24V
Fits Model	RGS240SFEA0AAAA
Fitment	OEM direct replacement

Compatibility

Engineered as a direct OEM replacement for the ICP / Tempstar / Heil RGS240SFEA0AAAA gas furnace. ICP manufactures under several brand labels (Heil, Tempstar, Comfortmaker, Arcoaire), so this kit also services the equivalent furnace platforms that share this control assembly. Always confirm the part number on your existing board before ordering.

Installation Guide

Safety First — Shut off gas and disconnect electrical power at the breaker. Verify zero voltage at the board terminals with a multimeter.
Access — Remove the furnace blower-compartment service panel.
Document — Photograph every wire and connector on the existing board before disconnecting anything.
Remove — Unplug each harness connector, remove the mounting screws, and lift out the failed control board.
Install — Mount the new 1183618 board, then reconnect every harness exactly as photographed.
Test — Restore gas and power, run a heat call, and confirm the inducer, ignition, flame, and blower sequence completes with no fault LED codes.

Signs You Need a Replacement

Furnace does not start on a thermostat call for heat.
Diagnostic LED flashes a hard-lockout or control fault code.
Inducer or blower runs continuously or never starts.
Visible burns, corrosion, or cracked traces on the existing board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board for RG...

$218.40

Frequently Asked Questions

Does this Control Board fit my ICP RGS240SFEA0AAAA — OEM Kit 1183618 | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS240SFEA0AAAA — OEM Kit 1183618 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS240SFEA0AAAA — OEM Kit 1183618 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu