What are the specs for this Control Board?

The correct replacement for ICP model WFMR045A036A1 — OEM Circuit Board | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WFMR045A036A1 — OEM Circuit Board | Ships Today.

ICP

ICP Furnace Control Board CEPL130438-01 for WFMR045A036A1 — OEM Circuit Board | Ships Today

Name: ICP Furnace Control Board CEPL130438-01 for WFMR045A036A1 — OEM Circuit Board | Ships Today
Brand: ICP
SKU: 1176943
Price: 245.70 USD
Availability: InStock

SKU: 1176943 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine ICP furnace control circuit board (OEM part number 1176943, board number CEPL130438-01) is the integrated furnace control (IFC) that sequences ignition, blower, and safety operation on the WFMR045A036A1 gas furnace. It reads the thermostat call, energizes the inducer, proves the pressure switch, fires the hot surface igniter, opens the gas valve, monitors flame through the sensor, and times the blower on and off delays. When the board fails, the furnace may lock out, short cycle, ignore the thermostat, or run the blower continuously. A failed board often shows a stored fault flash code on the diagnostic LED, scorched relay contacts, or burnt traces near the igniter terminals. Replacing the IFC restores the full ignition and safety sequence.

Specifications

Spec	Value
Part Number	1176943
Board Number	CEPL130438-01
Type	Integrated Furnace Control Board
Brand	ICP (Tempstar / Heil)
Control Voltage	24V
Functions	Ignition sequencing, blower timing, flame sense, safety monitoring
Fit	OEM direct replacement

Compatibility

Designed for the ICP / Tempstar / Heil WFMR045A036A1 gas furnace and other ICP-family units using control board CEPL130438-01. Match your existing board number before ordering, as IFC boards are model-specific.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter before touching the board.
Access — Remove the furnace control-area service panel.
Document — Photograph every wire harness and terminal connection on the board before disconnecting.
Remove — Unplug the harnesses, remove the mounting screws or standoffs, and lift out the old board.
Install — Mount the new board, reconnect each harness to its matching terminal per your photo, and set any DIP switches to match the original.
Test — Restore power, initiate a heat call, and watch the full ignition sequence and blower cycle complete without fault codes.

Signs You Need a Replacement

Furnace ignores the thermostat or fails to start a heat cycle
Repeated lockouts or short cycling with stored fault codes
Blower runs continuously or never engages
Visible scorching, burnt relays, or damaged traces on the board

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Furnace Control Board CEPL13...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP WFMR045A036A1 — OEM Circuit Board | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WFMR045A036A1 — OEM Circuit Board | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WFMR045A036A1 — OEM Circuit Board | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu