What HP motor do I need for my ICP unit?

The correct replacement for ICP model WAXT184A1 — OEM Blower Module | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WAXT184A1 — OEM Blower Module | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP ECM X-13 Motor Control 1/3 HP for WAXT184A1 — OEM Blower Module | Ships Today

Name: ICP ECM X-13 Motor Control 1/3 HP for WAXT184A1 — OEM Blower Module | Ships Today
Brand: ICP
SKU: 1185268
Price: 246.94 USD
Availability: InStock

SKU: 1185268 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM ECM X-13 motor control (1/3 HP), part number 1185268, for the ICP/Tempstar/Heil WAXT184A1 air handler. The X-13 is a constant-torque electronically commutated motor control that drives the indoor blower at programmed speed taps for quiet, efficient, and consistent airflow even as duct static changes. When the control fails the blower can run erratically, hum without spinning, lock to a single speed, or fail to start — resulting in no indoor airflow and poor heating or cooling performance. Replacing the X-13 control restores correct multi-tap blower operation without replacing the full motor assembly.

Specifications

Spec	Value
Part Number	1185268
Type	ECM X-13 Motor Control
Brand	ICP
Horsepower	1/3 HP
Motor Technology	Constant-Torque ECM (X-13)
Application	Indoor Blower / Air Handler
Fitment	OEM Direct Replacement

Compatibility

Engineered as a direct OEM replacement for the ICP, Tempstar, Heil, Comfortmaker and related brand WAXT184A1 air handler. Always confirm the part number stamped on your existing motor control matches 1185268 before installing.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter before touching any wiring.
Access — Remove the blower compartment service panel.
Document — Photograph every motor, control, and harness connection before disconnecting anything.
Remove — Unplug the motor harness and the control connector, then unbolt the X-13 control module from the motor end shield.
Install — Mount the new 1185268 control, reconnect the motor and control harnesses exactly per your photos, and confirm the speed-tap wiring matches the original.
Test — Restore power and verify the blower ramps and runs at the correct programmed speed in heat and cool.

Signs You Need a Replacement

Blower hums or buzzes but will not spin up
Indoor fan runs at only one speed or wrong speed
Intermittent no-airflow calls or blower drops out under load
Burnt-electronics smell or visible scorching on the control module

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP ECM X-13 Motor Control 1/3 H...

$246.94

Frequently Asked Questions

Does this Fan Motor fit my ICP WAXT184A1 — OEM Blower Module | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WAXT184A1 — OEM Blower Module | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WAXT184A1 — OEM Blower Module | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu