ICP ECM X-13 Fan Motor Control for WAHA30054A1 — 1/3 HP | Ships Today

Overview

This is the genuine OEM ECM X-13 motor control (part number 1185274), a 1/3 HP constant-torque variable-speed blower motor used in ICP, Tempstar, and Heil air handlers and fan coils. The X-13 platform delivers programmed constant airflow across changing static pressure for better comfort and efficiency than a standard PSC motor. When this motor or its integrated control fails, the blower may run intermittently, fail to start, hum without spinning, or trip on thermal overload. Installing the correct OEM 1/3 HP X-13 control restores proper airflow staging and quiet operation.

Specifications

Compatibility

Designed as the OEM blower motor control for the ICP / Tempstar / Heil WAHA30054A1 air handler. It also fits other WAHA-series fan coils that originally shipped with the 1185274 X-13 control. Always confirm your existing motor part number and HP before ordering.

Installation Guide

1. Safety First — Disconnect power at the breaker and verify zero voltage at the unit with a multimeter.
2. Access — Remove the blower compartment service panel.
3. Document — Photograph all motor and control wiring, including the tap connections, before disconnecting.
4. Remove — Unplug the motor harness, remove the blower assembly, loosen the set screw, and pull the old X-13 motor from the housing.
5. Install — Mount the new 1/3 HP motor in the blower housing, transfer the wheel and set screw, reinstall the assembly, and reconnect the harness exactly per your photos.
6. Test — Restore power and verify the blower ramps to programmed speed on a call for fan/heat/cool.

Signs You Need a Replacement

• Blower won't start or only hums when energized
• Motor spins briefly then shuts off on thermal overload
• Weak or inconsistent airflow at the registers
• Burning smell or visible scorching at the motor control

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.