What HP motor do I need for my ICP unit?

The correct replacement for ICP model WPG3244040LKC1 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3244040LKC1 | Ships Today.

My AC fan is not spinning. What part do I need?

A fan that does not spin, spins slowly, or makes grinding or squealing noises needs a new motor. Grinding means the bearings have failed. Squealing means the bearings are dry. No spin with a humming sound means the capacitor may be the issue. Check the motor capacitor before replacing the entire motor.

ICP

ICP ECM X-13 Blower Motor Control 1/2 HP for WPG3244040LKC1 | Ships Today

Name: ICP ECM X-13 Blower Motor Control 1/2 HP for WPG3244040LKC1 | Ships Today
Brand: ICP
SKU: 1185842
Price: 245.70 USD
Availability: InStock

SKU: 1185842 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ECM X-13 motor control module (part #1185842) is the 1/2 HP constant-torque blower motor electronics for the ICP/Tempstar/Heil WPG3244040LKC1 unit. The X-13 is an electronically commutated motor that holds programmed torque across static-pressure changes, delivering higher efficiency and quieter operation than a standard PSC blower. When the motor or its control fails, you'll see weak or no airflow, intermittent blower operation, overheating, or comfort and efficiency complaints. This is a genuine OEM-spec replacement matched to the original 1/2 HP rating and tap programming for this platform.

Specifications

Spec	Value
Part Number	1185842
Type	ECM X-13 Constant-Torque Motor Control
Brand	ICP / Tempstar / Heil
Horsepower	1/2 HP
Application	Furnace / Air Handler Blower
Fit	OEM

Compatibility

Direct OEM replacement for the ICP, Tempstar, Heil, Comfortmaker, and Arcoaire WPG3244040LKC1 packaged unit. Confirm the 1/2 HP rating and ECM X-13 designation on your existing motor before ordering.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter; ECM motors retain charge, so wait before handling.
Access — Remove the blower compartment service panel and slide out the blower assembly if needed.
Document — Photograph the 5-pin/16-pin control connectors and tap wiring before disconnecting.
Remove — Unplug the connectors, loosen the motor mount and blower wheel set screw, and remove the old motor/control.
Install — Mount the new motor, reinstall the blower wheel, and reconnect all connectors per your photo.
Test — Restore power, run a fan and heat/cool call, and confirm smooth ramp-up and full airflow.

Signs You Need a Replacement

Weak, reduced, or no airflow from the blower
Blower starts intermittently or fails to start
Motor runs hot, surges, or makes unusual noise
Comfort complaints or tripped limit from poor airflow

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP ECM X-13 Blower Motor Contro...

$245.70

Frequently Asked Questions

Does this Fan Motor fit my ICP WPG3244040LKC1 | Ships Today?

Yes. This is the factory-specified OEM fan motor for the ICP WPG3244040LKC1 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the fan motor on my ICP WPG3244040LKC1 | Ships Today?

Difficulty: Medium-Hard (1–2 hrs)
Step 1: Turn off breaker. Step 2: Note motor specs: HP, RPM, voltage, rotation direction. Step 3: Remove old motor from mounting. Step 4: Transfer fan blade to new motor. Step 5: Mount new motor, reconnect wiring. Step 6: Restore power, verify rotation direction.

My AC fan isn’t spinning. What part do I need?

Fan not spinning, spinning slowly, or making grinding/squealing noises = motor failure. Grinding = bearings failed. Squealing = bearings dry. No spin + hum = check the motor capacitor first before replacing the entire motor.

Is this fan motor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP fan motor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu