Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Dual Run Capacitor for WTA3482000RKA1 — 55+10 MFD 370V | Ships Today
ICP

ICP Dual Run Capacitor for WTA3482000RKA1 — 55+10 MFD 370V | Ships Today

SKU: WTA3482000RKA1 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM round dual-run capacitor (part number 1176101) is rated 55+10 MFD at 370 volts and is the factory-specified start/run component for the ICP WTA3482000RKA1 condensing unit. A dual-run capacitor supplies a phase-shifted current to both the compressor (the 55 MFD side) and the condenser fan motor (the 10 MFD side) so both motors can start under load and run efficiently. As the capacitor degrades it loses microfarad capacity, robbing the motors of starting torque. Typical failure symptoms include a humming compressor that won't start, a slow or stalled condenser fan, breaker trips, hard starting in hot weather, and a bulged or leaking capacitor can. A fresh capacitor is a fast, low-cost fix that restores full cooling performance.

Specifications

Spec Value
Part Number 1176101
Type Dual Run, Round
Brand ICP
Capacitance 55+10 MFD
Voltage 370V
Fits Model WTA3482000RKA1

Compatibility

Engineered for the ICP / Tempstar / Heil WTA3482000RKA1 air conditioning condenser. The 55+10 MFD 370V rating must match your unit's original capacitor — verify the MFD and voltage stamped on the old can before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter. Discharge the old capacitor across its terminals with an insulated resistor before handling.
  2. Access — Remove the condenser service panel.
  3. Document — Photograph all wire connections (HERM, FAN, C) before disconnecting.
  4. Remove — Pull the spade connectors, loosen the mounting strap, and lift out the old capacitor.
  5. Install — Mount the new capacitor, secure the strap, and reconnect each wire to its matching terminal per your photo.
  6. Test — Restore power and verify the compressor and condenser fan start promptly and run smoothly.

Signs You Need a Replacement

  • Compressor hums but will not start
  • Condenser fan spins slowly or needs a manual push
  • AC trips the breaker or hard-starts on hot days
  • Bulged, swollen, or leaking capacitor top

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my ICP WTA3482000RKA1 — 55+10 MFD 370V | Ships Today?
Yes. This is the factory-specified OEM capacitor for the ICP WTA3482000RKA1 — 55+10 MFD 370V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my ICP WTA3482000RKA1 — 55+10 MFD 370V | Ships Today?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online