Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Defrost Control Board for YJ036GA2 — Heat Pump Module | Ships Today
ICP

ICP Defrost Control Board for YJ036GA2 — Heat Pump Module | Ships Today

SKU: 1069364 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This genuine OEM defrost control board (part number 1069364) is the brain of the ICP/Tempstar/Heil YJ036GA2 heat pump's defrost cycle. In heating mode, frost builds on the outdoor coil; the defrost board monitors the defrost thermostat and an internal timer, then temporarily reverses the unit to cooling and shuts off the outdoor fan to melt that frost. It also coordinates the reversing valve coil, the contactor, and auxiliary/strip heat staging. When this board fails, the heat pump can ice over solid in winter, run weak or no heat, fail to switch modes, or short-cycle. Typical symptoms include a coil packed in ice, the outdoor fan behaving incorrectly during defrost, no 24V output to the reversing valve, or the unit not entering defrost at all.

Specifications

Spec Value
Part Number 1069364
Type Defrost Control Board
Brand ICP / Tempstar / Heil
Control Voltage 24V
Application Heat Pump Defrost Control
Fit OEM Replacement

Compatibility

Engineered for the ICP YJ036GA2 heat pump and used across ICP-family condensers — Tempstar, Heil, Comfortmaker — that specify defrost board 1069364. Match the board's part number and connector layout to your existing unit before installing.

Installation Guide

  1. Safety First — Disconnect power at the breaker and outdoor disconnect, verify zero voltage with a multimeter.
  2. Access — Remove the condenser electrical access panel.
  3. Document — Photograph every wire and connector plug on the board before removing anything.
  4. Remove — Unplug the harnesses, release the standoff clips or screws, and lift out the old board.
  5. Install — Seat the new board on the standoffs and reconnect each harness to the matching terminal per your photo.
  6. Test — Restore power, run a heating cycle, and confirm the unit initiates a proper defrost (reversing valve shifts, outdoor fan stops, then resumes).

Signs You Need a Replacement

  • Outdoor coil ices over and never defrosts in heating mode
  • Heat pump won't switch between heat and cool
  • Outdoor fan runs or stops at the wrong time during defrost
  • No 24V signal to the reversing valve or short-cycling

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my ICP YJ036GA2 — Heat Pump Module | Ships Today?
Yes. This is the factory-specified OEM control board for the ICP YJ036GA2 — Heat Pump Module | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my ICP YJ036GA2 — Heat Pump Module | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online