What are the specs for this Control Board?

The correct replacement for ICP model YJ024GB1 — 24V Heat Pump Timer | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YJ024GB1 — 24V Heat Pump Timer | Ships Today.

ICP

ICP Defrost Control Board for YJ024GB1 — 24V Heat Pump Timer | Ships Today

Name: ICP Defrost Control Board for YJ024GB1 — 24V Heat Pump Timer | Ships Today
Brand: ICP
SKU: 1069364
Price: 179.40 USD
Availability: InStock

SKU: 1069364 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ICP Defrost Control Board (part number 1069364) manages the defrost cycle on your ICP/Tempstar/Heil YJ024GB1 heat pump. It watches outdoor coil temperature and accumulated run time, then triggers and ends the defrost cycle to keep frost and ice off the outdoor coil during heating. Running on a 24V control circuit, the board sequences the reversing valve, outdoor fan, and compressor through each defrost event. A failed defrost board lets the coil ice up and lose heating capacity, forces the auxiliary heat strips to run constantly, or traps the unit in a permanent defrost state. Installing a new board restores correct defrost timing and protects the compressor from liquid refrigerant return.

Specifications

Spec	Value
Part Number	1069364
Type	Defrost Control Board
Brand	ICP (Tempstar / Heil)
Control Voltage	24V
Application	Heat Pump Defrost
Fitment	OEM Replacement

Compatibility

Direct OEM replacement for the ICP/Tempstar/Heil YJ024GB1 heat pump and equivalent units in the same family that originally shipped with part 1069364. Confirm the part number on your existing board and match any timing jumper settings before ordering.

Installation Guide

Safety First — Disconnect power at the breaker and outdoor disconnect, then verify zero voltage with a multimeter.
Access — Remove the control access panel on the outdoor unit.
Document — Photograph every wire and terminal position on the old board before disconnecting.
Remove — Label and disconnect the low- and line-voltage leads, then release the board from its standoffs.
Install — Mount the new board, reconnect each lead per your photo, and set the defrost timing jumpers to match the original.
Test — Restore power and verify the unit heats, initiates a defrost cycle, and terminates normally.

Signs You Need a Replacement

Outdoor coil ices over and won't clear during heating
Unit stuck in continuous defrost or never defrosts
Auxiliary/emergency heat runs nonstop, raising energy bills
Burnt traces, scorched components, or no response on a heat call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Defrost Control Board for YJ...

$179.40

Frequently Asked Questions

Does this Control Board fit my ICP YJ024GB1 — 24V Heat Pump Timer | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP YJ024GB1 — 24V Heat Pump Timer | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP YJ024GB1 — 24V Heat Pump Timer | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu