Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Defrost Control Board for YG060GC2 — 34332101 OEM Heat Pump | Ships Today
ICP

ICP Defrost Control Board for YG060GC2 — 34332101 OEM Heat Pump | Ships Today

SKU: 34332101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is the genuine OEM defrost control board (part number 34332101) for the ICP/Tempstar/Heil YG060GC2 heat pump. The defrost board is the outdoor-unit logic controller: it monitors the defrost thermostat and the run-time clock, times the defrost cycle, energizes the reversing valve and auxiliary heat, and controls the condenser fan during a defrost. When it fails the heat pump can ice over and never defrost, defrost too often and waste energy, fail to switch the reversing valve, or stop running the outdoor fan. Boards commonly fail from power surges, moisture intrusion, and corroded relays, often showing scorched traces or stuck relays.

Specifications

Spec Value
Part Number 34332101
Type Defrost Control Board
Brand ICP / Tempstar / Heil
Control Voltage 24 V
Application Heat Pump Outdoor Unit
Fits Model YG060GC2

Compatibility

Factory replacement defrost control board for the ICP YG060GC2 and other Tempstar, Heil, and Comfortmaker heat pumps using this board. Match the part number and connector layout to your existing board, and note the defrost timing pin setting before swapping.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage at the board with a multimeter.
  2. Access — Remove the outdoor unit service panel to expose the control board.
  3. Document — Photograph every connector and the defrost timing jumper/pin setting before disconnecting.
  4. Remove — Unplug each harness, release the standoffs or screws, and lift out the old board.
  5. Install — Mount the new board, set the defrost timing pin to match the original, and reconnect every harness per your photo.
  6. Test — Restore power, run a heating call, and verify normal operation and a correct timed defrost cycle.

Signs You Need a Replacement

  • Outdoor coil ices over and the unit never defrosts.
  • Unit defrosts far too frequently or at the wrong times.
  • Reversing valve or condenser fan won't energize on a defrost.
  • Visible scorching, burnt relays, or corrosion on the board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my ICP YG060GC2 — 34332101 OEM Heat Pump | Ships Today?
Yes. This is the factory-specified OEM control board for the ICP YG060GC2 — 34332101 OEM Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my ICP YG060GC2 — 34332101 OEM Heat Pump | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online