Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Defrost Control Board for YG030GA1 — Heat Pump | Ships Today
ICP

ICP Defrost Control Board for YG030GA1 — Heat Pump | Ships Today

SKU: 1069364 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM defrost control board (part number 1069364) for the ICP Tempstar Heil YG030GA1 heat pump. The defrost board is the brain of the heat pump's defrost cycle: it monitors the defrost thermostat/sensor and accumulated run time, then commands the reversing valve, outdoor fan, and auxiliary heat to clear frost from the outdoor coil during cold-weather operation. A failed defrost board causes a heavily iced outdoor coil, poor heating performance, short-cycling, or a heat pump that never initiates (or never terminates) defrost. Because it coordinates multiple components, a faulty board often presents as several unrelated symptoms at once.

Specifications

Spec Value
Part Number 1069364
Type Defrost Control Board
Brand ICP / Tempstar / Heil / Comfortmaker
Application Heat Pump Defrost Control
Controls Reversing valve, outdoor fan, defrost timing/sensor
Fit OEM Replacement

Compatibility

Engineered as a direct OEM replacement for the ICP/Tempstar/Heil YG030GA1 heat pump and other ICP-family units that use board 1069364. Confirm the part number printed on your existing board and match the connector/terminal layout before installing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage at the board terminals with a multimeter.
  2. Access — Remove the condenser control-box service panel to expose the defrost board.
  3. Document — Photograph all connectors, plugs, and individual wire positions before removing anything.
  4. Remove — Unplug the harnesses and spade connectors, release the board's standoffs/screws, and lift out the old board.
  5. Install — Seat the new board on its standoffs, then reconnect every harness and lead exactly per your photos; set any defrost-timing jumper to match the original.
  6. Test — Restore power and run a heating call; verify normal operation and, where possible, a forced defrost cycle.

Signs You Need a Replacement

  • Outdoor coil ices over and never goes into defrost
  • Heat pump stuck in defrost or short-cycling the reversing valve
  • Outdoor fan or reversing valve not switching on command
  • No control output / board shows scorched traces or relays

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my ICP YG030GA1 — Heat Pump | Ships Today?
Yes. This is the factory-specified OEM control board for the ICP YG030GA1 — Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my ICP YG030GA1 — Heat Pump | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online