What are the specs for this Control Board?

The correct replacement for ICP model YG024G – Heat Pump | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YG024G – Heat Pump | Ships Today.

ICP

ICP Defrost Control Board for YG024G – Heat Pump | Ships Today

Name: ICP Defrost Control Board for YG024G – Heat Pump | Ships Today
Brand: ICP
SKU: 34332101
Price: 193.70 USD
Availability: InStock

SKU: 34332101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM defrost control board (part number 34332101) governs the defrost cycle on the ICP/Heil/Tempstar YG024G heat pump. During heating operation the outdoor coil collects frost; this board reads the coil temperature sensor and tracks compressor run time, then periodically commands a defrost to melt that frost and keep the heat pump efficient. It coordinates the reversing valve, the compressor contactor, the outdoor fan, and the defrost timing intervals. When the board fails you may find the outdoor coil fully iced over, a system that never defrosts (or defrosts far too often), missing auxiliary heat staging, or a unit that won't change between heating and cooling. Because this single board controls so many functions, one failure can imitate several separate component faults – making the defrost board a high-value diagnostic and replacement part.

Specifications

Spec	Value
Part Number	34332101
Type	Defrost Control Board
Brand	ICP / Heil / Tempstar
Control Voltage	24V
Function	Defrost timing, reversing valve & fan control

Compatibility

Direct OEM replacement for the ICP/Heil/Tempstar/Comfortmaker YG024G heat pump and units calling for part 34332101. Confirm the part number and connector layout against your existing board before ordering.

Installation Guide

Safety First – Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access – Remove the condenser control box cover.
Document – Photograph every wire harness and plug location before unplugging anything.
Remove – Disconnect the harnesses, release the standoffs/screws, and lift out the old board.
Install – Seat the new board on the standoffs and reconnect each harness per your photo.
Test – Restore power, run a heating call, and initiate or observe a defrost cycle to confirm operation.

Signs You Need a Replacement

Outdoor coil ices over and never clears.
System defrosts too often or not at all.
Reversing valve won't switch between heat and cool.
Erratic outdoor fan or compressor behavior in heating mode.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Defrost Control Board for YG...

$193.70

Frequently Asked Questions

Does this Control Board fit my ICP YG024G – Heat Pump | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP YG024G – Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP YG024G – Heat Pump | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu