Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Defrost Control Board for YG018GC1 — Heat Pump | Ships Today
ICP

ICP Defrost Control Board for YG018GC1 — Heat Pump | Ships Today

SKU: 34332101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is the OEM defrost control board (ICP part 34332101) for the ICP / Tempstar / Heil YG018GC1 heat pump. The defrost board is the brain of the outdoor unit's defrost cycle — it monitors the defrost thermostat/sensor, runs the timing logic (typically selectable 30/60/90-minute intervals), energizes the reversing valve coil, and controls the contactor and auxiliary heat during defrost. A failed board can leave the outdoor coil iced over, prevent the unit from switching modes, cause no-heat conditions, or trigger continuous defrost. Replacing the board restores proper defrost timing and protects the compressor from running into a frozen coil.

Specifications

Spec Value
Part Number 34332101
Type Defrost Control Board
Brand ICP (Tempstar / Heil / Comfortmaker)
Control Voltage 24V
Function Defrost timing, reversing valve & contactor control
Fitment OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP YG018GC1 heat pump and other ICP-family heat pumps (Tempstar, Heil, Comfortmaker, Arcoaire) that specify defrost board 34332101. Match the connector layout, terminal labeling, and defrost timer pin selection against your existing board before installing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the condenser control/access panel to reach the defrost board.
  3. Document — Photograph all wiring, plug positions, and the defrost timer jumper/pin setting before disconnecting.
  4. Remove — Unplug the connectors, release the mounting standoffs/screws, and lift out the old board.
  5. Install — Mount the new board, reconnect every plug per your photo, and set the defrost timer pin to match the original.
  6. Test — Restore power, initiate a defrost (or force one), and confirm correct mode switching and timing.

Signs You Need a Replacement

  • Outdoor coil frosts or ices over and never defrosts.
  • Heat pump won't switch between heating and cooling.
  • Unit stuck in continuous defrost or never initiates defrost.
  • No response from the board, blown onboard fuse, or burnt/scorched components.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my ICP YG018GC1 — Heat Pump | Ships Today?
Yes. This is the factory-specified OEM control board for the ICP YG018GC1 — Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my ICP YG018GC1 — Heat Pump | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online