What are the specs for this Control Board?

The correct replacement for ICP model YE060F — Heat Pump | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YE060F — Heat Pump | Ships Today.

ICP

ICP Defrost Control Board for YE060F — Heat Pump | Ships Today

Name: ICP Defrost Control Board for YE060F — Heat Pump | Ships Today
Brand: ICP
SKU: 34332101
Price: 185.83 USD
Availability: InStock

SKU: 34332101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM defrost control board (part number 34332101) manages the defrost cycle on the ICP/Heil/Tempstar YE060F heat pump. The board monitors the defrost thermostat and coil temperature, then initiates and terminates defrost based on its timer interval to clear frost and ice from the outdoor coil during heating operation. It coordinates the compressor, the reversing valve, and the outdoor fan, and energizes auxiliary heat as needed during the cycle. When the defrost board fails, the outdoor coil can ice over and choke airflow, the system loses heating capacity, the reversing valve may not switch, or the unit may get stuck in defrost. Because it sits in a harsh outdoor environment exposed to moisture, temperature swings, and voltage surges, the defrost board is a common service replacement on aging heat pumps.

Specifications

Spec	Value
Part Number	34332101
Type	Defrost Control Board
Brand	ICP / Heil / Tempstar
Control Voltage	24 VAC
Application	Heat Pump Defrost
Fit	OEM

Compatibility

Directly fits the ICP/Heil/Tempstar YE060F heat pump and related Comfortmaker/Heil-built outdoor units that use board 34332101. Confirm the part number printed on your existing board before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, verify zero voltage with a multimeter.
Access — Remove the condenser/control-box service panel.
Document — Photograph every wire and connector on the board before disconnecting.
Remove — Unplug connectors, release the mounting standoffs or screws, and lift out the old board.
Install — Seat the new board on its standoffs and reconnect each connector per your photo, matching defrost-time and pin settings.
Test — Restore power, run a heating call, and confirm normal operation and proper defrost initiation/termination.

Signs You Need a Replacement

Outdoor coil ices over and the unit never enters or exits defrost.
Heat pump gets stuck running in defrost or short-cycles the reversing valve.
No 24V output to the compressor contactor or fan during a heating call.
Visible burn marks, corrosion, or a cracked relay on the board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Defrost Control Board for YE...

$185.83

Frequently Asked Questions

Does this Control Board fit my ICP YE060F — Heat Pump | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP YE060F — Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP YE060F — Heat Pump | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu