Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Defrost Control Board for YE048G — Heat Pump OEM | Ships Today
ICP

ICP Defrost Control Board for YE048G — Heat Pump OEM | Ships Today

SKU: 34332101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM defrost control board (part number 34332101) for the ICP / Tempstar / Heil YE048G heat pump. The defrost board is the brain of the outdoor unit in heating mode: it monitors the defrost thermostat and ambient conditions, times the heat-pump defrost cycle, switches the reversing valve, and cycles the outdoor fan and auxiliary heat so the outdoor coil can shed frost. When this board fails, the heat pump may ice over solid, fail to defrost, run the auxiliary strip heat constantly, or short-cycle. Typical symptoms include a thick layer of ice on the outdoor coil that never clears, no heating output, the reversing valve not switching, the outdoor fan running during defrost, or no power to the contactor coil at all.

Specifications

Spec Value
Part Number 34332101
Type Defrost Control Board
Brand ICP / Tempstar / Heil
Control Voltage 24V
Function Heat Pump Defrost Cycle Management
Fit OEM Replacement

Compatibility

Designed as the factory replacement defrost board for the ICP YE048G heat pump and used across compatible ICP-family outdoor units sold under the Heil, Tempstar, and Comfortmaker labels. Match the part number and connector layout to your existing board before installing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the control panel cover on the condensing unit.
  3. Document — Photograph every connector, jumper, and the defrost timing pin setting before unplugging anything.
  4. Remove — Unplug the wiring harnesses and remove the mounting screws or standoffs holding the old board.
  5. Install — Mount the new board, set the defrost timing jumper to match the original, and reconnect each harness per your photo.
  6. Test — Restore power, place a call for heat, and confirm normal heating and a proper defrost cycle.

Signs You Need a Replacement

  • Outdoor coil ices over and never clears
  • Heat pump produces no heat or only auxiliary strip heat
  • Reversing valve does not switch during defrost
  • System short-cycles or the contactor never energizes

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my ICP YE048G — Heat Pump OEM | Ships Today?
Yes. This is the factory-specified OEM control board for the ICP YE048G — Heat Pump OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my ICP YE048G — Heat Pump OEM | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online