Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Defrost Control Board for YE036H Heat Pump — 24V OEM | Ships Today
ICP

ICP Defrost Control Board for YE036H Heat Pump — 24V OEM | Ships Today

SKU: 34332101 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

The ICP 34332101 Defrost Control Board is the OEM electronic timing and logic board that manages the defrost cycle on the YE036H heat pump. It monitors coil temperature and accumulated run time, then commands the reversing valve and outdoor fan to clear frost from the outdoor coil during cold-weather operation. Operating on a 24V control signal, this board coordinates compressor, fan, and auxiliary heat staging so the system defrosts efficiently without short-cycling. When this board fails, the heat pump may ice over, run continuously in defrost, or never initiate defrost at all — leaving the outdoor coil buried in frost and starving the system of capacity. Installing the correct OEM board restores reliable, factory-spec defrost timing.

Specifications

Spec Value
Part Number 34332101
Type Defrost Control Board
Brand ICP
Control Voltage 24V
Application Heat Pump Defrost
Fitment OEM

Compatibility

Engineered as the direct OEM replacement for the ICP / Tempstar / Heil YE036H heat pump. Also commonly shared across related ICP-family condensing units that use the 34332101 defrost board. Always confirm against your existing board part number before ordering.

Installation Guide

  1. Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter before touching any terminals.
  2. Access — Remove the outdoor unit service panel to expose the control compartment.
  3. Document — Photograph every wire and terminal connection on the old board before disconnecting anything.
  4. Remove — Label and disconnect each low-voltage and line-voltage lead, then unsnap or unscrew the failed board from its standoffs.
  5. Install — Mount the new 34332101 board on the standoffs and reconnect each wire exactly per your photo.
  6. Test — Restore power, initiate a defrost cycle, and confirm the reversing valve, fan, and timing operate correctly.

Signs You Need a Replacement

  • Outdoor coil ices over and never defrosts
  • Unit stuck in continuous defrost or short-cycling
  • No 24V output to reversing valve or fan during defrost
  • Visible burn marks, corrosion, or a cracked relay on the board

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my ICP YE036H Heat Pump — 24V OEM | Ships Today?
Yes. This is the factory-specified OEM control board for the ICP YE036H Heat Pump — 24V OEM | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my ICP YE036H Heat Pump — 24V OEM | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online