What are the specs for this Control Board?

The correct replacement for ICP model WCH3614GKC210 — Heat Pump | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WCH3614GKC210 — Heat Pump | Ships Today.

ICP

ICP Defrost Control Board for WCH3614GKC210 — Heat Pump | Ships Today

Name: ICP Defrost Control Board for WCH3614GKC210 — Heat Pump | Ships Today
Brand: ICP
SKU: 1173636
Price: 214.50 USD
Availability: InStock

SKU: 1173636 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ICP defrost control board (part number 1173636) is the brain of the WCH3614GKC210 heat pump's defrost cycle. It monitors the defrost thermostat and the timer interval, then commands the reversing valve and shuts off the outdoor fan to melt frost from the outdoor coil during heating operation. A failed board is a frequent cause of an outdoor coil icing solid, weak heat, a unit stuck in defrost, or the system failing to switch between heating and cooling. Replacing it restores correct, automatic defrost timing and protects the compressor.

Specifications

Spec	Value
Part Number	1173636
Type	Defrost Control Board
Brand	ICP (Tempstar / Heil)
Control Voltage	24V
Function	Defrost timing / reversing valve control

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil WCH3614GKC210 heat pump. This board is shared across many comparable ICP-family heat pump condensers — verify the part number and connector layout against your existing board before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the condenser service/control panel.
Document — Photograph every wire and connector position on the board before disconnecting.
Remove — Unplug the connectors, release the board standoffs/screws, and lift the old board out.
Install — Seat the new board on its standoffs and reconnect each plug exactly per your photo.
Test — Restore power, initiate a defrost test, and confirm the reversing valve energizes and the fan cycles correctly.

Signs You Need a Replacement

Outdoor coil ices over and never clears in heating mode
Unit stuck in defrost or never enters defrost
No or weak heat output from the heat pump
System won't switch properly between heating and cooling

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Defrost Control Board for WC...

$214.50

Frequently Asked Questions

Does this Control Board fit my ICP WCH3614GKC210 — Heat Pump | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP WCH3614GKC210 — Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP WCH3614GKC210 — Heat Pump | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu