Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Defrost Control Board for RYMA10H001A — OEM 1052757 Heat Pump Board | Ships Today
ICP

ICP Defrost Control Board for RYMA10H001A — OEM 1052757 Heat Pump Board | Ships Today

SKU: 1052757 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM defrost control board (part number 1052757) for the ICP Tempstar Heil RYMA10H001A heat pump. The defrost control board governs the outdoor unit's defrost cycle — monitoring coil temperature and accumulated run time, then commanding a reversal into defrost mode to clear frost from the outdoor coil in cold weather. A failed board lets the coil ice over, kills heating capacity, prevents the reversing valve from energizing, or causes the unit to run nonstop without defrosting. Typical symptoms include a solid sheet of ice on the outdoor coil, no switch between heating and cooling, no emergency heat, or continuous operation. This board runs on a 24V control circuit and installs as a direct, plug-in replacement for the original.

Specifications

Spec Value
Part Number 1052757
Type Defrost Control Board
Brand ICP / Tempstar / Heil
Control Voltage 24V
Application Heat Pump Defrost Control
Fits Model RYMA10H001A

Compatibility

This board is the factory-specified defrost control for the ICP/Tempstar/Heil RYMA10H001A heat pump. Because ICP-family equipment (Tempstar, Heil, Comfortmaker, Arcoaire) shares control platforms, this OEM part frequently services related models — verify against your nameplate or existing part number before ordering.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter before touching wiring.
  2. Access — Remove the outdoor unit's control-panel cover to expose the defrost board.
  3. Document — Photograph every wire and terminal position before disconnecting.
  4. Remove — Label and unplug the low-voltage harness, defrost thermostat, and sensor leads, then unscrew the old board from its standoffs.
  5. Install — Mount the new 1052757 board, reconnect each wire exactly as photographed, and match the defrost timing pin setting to the original.
  6. Test — Restore power and verify the unit heats, energizes the reversing valve, and initiates a defrost cycle on demand.

Signs You Need a Replacement

  • Outdoor coil ices over and never defrosts.
  • Heat pump won't switch between heating and cooling.
  • Reversing valve solenoid fails to energize during defrost.
  • Unit short-cycles or runs continuously with no heat.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my ICP RYMA10H001A — OEM 1052757 Heat Pump Board | Ships Today?
Yes. This is the factory-specified OEM control board for the ICP RYMA10H001A — OEM 1052757 Heat Pump Board | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my ICP RYMA10H001A — OEM 1052757 Heat Pump Board | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online