What are the specs for this Control Board?

The correct replacement for ICP model RHX060K0XA0AAA – OEM Replacement | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RHX060K0XA0AAA – OEM Replacement | Ships Today.

ICP

ICP Control Board Kit for RHX060K0XA0AAA – OEM Replacement | Ships Today

Name: ICP Control Board Kit for RHX060K0XA0AAA – OEM Replacement | Ships Today
Brand: ICP
SKU: 1183618
Price: 206.70 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part number 1183618, factory reference KIT CONTROL BOARD) is the electronic brain of the ICP RHX060K0XA0AAA heat pump. It manages defrost timing and termination, sequences the compressor and reversing valve, monitors the 24V demand signals from the thermostat, and protects the system with built-in time delays. The kit ships with the board and the mounting/wiring hardware needed for a clean replacement. A failing control board produces some of the most frustrating intermittent faults in HVAC service: no response to a heating or cooling call, the unit stuck in or never entering defrost, ice buildup on the outdoor coil in heat-pump mode, or relays that chatter and fail to sequence. Replacing the board with the OEM-matched kit restores correct sequencing and defrost logic.

Specifications

Spec	Value
Part Number	1183618
Factory Reference	KIT CONTROL BOARD
Type	Defrost / Sequencing Control Board
Brand	ICP
Control Voltage	24V
Application	Heat Pump Control

Compatibility

This board kit is the OEM-specified control for the ICP RHX060K0XA0AAA heat pump and equivalent Tempstar, Heil, and Comfortmaker units on the same platform. Match the OEM part number and connector layout against your existing board before installing.

Installation Guide

Safety First – Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access – Remove the control compartment panel.
Document – Photograph every connector and wire position before disconnecting.
Remove – Unplug the harnesses, remove the mounting screws/standoffs, and lift out the old board.
Install – Mount the new board on the supplied hardware and reconnect each harness per your photo.
Test – Restore power and verify heating, cooling, and a defrost cycle all sequence correctly.

Signs You Need a Replacement

No response to a heating or cooling call
Outdoor coil ices up — defrost never initiates or terminates
Relays chatter or fail to sequence the compressor/reversing valve
Intermittent shutdowns or error/fault indications

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Control Board Kit for RHX060...

$206.70

Frequently Asked Questions

Does this Control Board fit my ICP RHX060K0XA0AAA – OEM Replacement | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RHX060K0XA0AAA – OEM Replacement | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RHX060K0XA0AAA – OEM Replacement | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu