What are the specs for this Control Board?

The correct replacement for ICP model RGS244HDFA0AAAA — 24V Furnace Integrated Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS244HDFA0AAAA — 24V Furnace Integrated Control | Ships Today.

ICP

ICP Control Board Kit for RGS244HDFA0AAAA — 24V Furnace Integrated Control | Ships Today

Name: ICP Control Board Kit for RGS244HDFA0AAAA — 24V Furnace Integrated Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 219.70 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM integrated furnace control board kit (part number 1183618) for the ICP / Tempstar / Heil RGS244HDFA0AAAA gas furnace. The control board is the brain of the furnace — it manages the ignition sequence, monitors safety switches, sequences the inducer and blower motors, and runs the 24V low-voltage control circuit that ties the thermostat, gas valve, and limit switches together. When this board fails, the furnace will not run a proper heating cycle even when every other component is healthy. Common failure symptoms include no response to a thermostat call, the inducer running but no ignition, blower running continuously, rapid short-cycling, or a board with visibly burnt traces, scorched relays, or a blown onboard fuse. This kit ships as a direct OEM replacement with the correct firmware and connector layout for this furnace family.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP / Tempstar / Heil
Control Voltage	24V
Fitment	OEM Direct Replacement
Application	Gas Furnace

Compatibility

Engineered for the ICP-built RGS244HDFA0AAAA gas furnace sold under the ICP, Tempstar, Heil, and Comfortmaker brands. Always match the part number stamped on your existing board before ordering, as control boards are revision-specific.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the blower compartment service panel to expose the control board.
Document — Photograph every wire and connector on the existing board before disconnecting anything.
Remove — Unplug each harness, release the board standoffs or mounting screws, and lift the old board out.
Install — Mount the new board on the same standoffs and reconnect each harness exactly per your photo.
Test — Restore power, call for heat, and confirm a full ignition, flame, and blower cycle.

Signs You Need a Replacement

No response from the furnace on a thermostat heat call
Inducer runs but the igniter or gas valve never energizes
Blower runs nonstop or fails to start after ignition
Visible burnt traces, scorched relays, or a blown onboard fuse

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Control Board Kit for RGS244...

$219.70

Frequently Asked Questions

Does this Control Board fit my ICP RGS244HDFA0AAAA — 24V Furnace Integrated Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS244HDFA0AAAA — 24V Furnace Integrated Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS244HDFA0AAAA — 24V Furnace Integrated Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu