What are the specs for this Control Board?

The correct replacement for ICP model RGS213SSCA0AAAA — Furnace Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS213SSCA0AAAA — Furnace Control | Ships Today.

ICP

ICP Control Board Kit for RGS213SSCA0AAAA — Furnace Control | Ships Today

Name: ICP Control Board Kit for RGS213SSCA0AAAA — Furnace Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 227.50 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM control board kit (part #1183618) for ICP / Tempstar / Heil furnace model RGS213SSCA0AAAA. The integrated furnace control board is the brain of the unit — it manages the ignition sequence, monitors the flame sensor and limit/pressure safeties, sequences the inducer and blower motors, and runs the on-board diagnostic LED. Supplied as a complete kit, it includes the mounting and connection hardware needed for a clean replacement. Control boards typically fail from voltage surges, overheating, corrosion, or burned relays. Symptoms include a completely dead furnace, a board that won't initiate ignition, blowers or inducers that run continuously or not at all, or a diagnostic LED flashing a hard-fault/board error code.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP
Includes	Control board + mounting hardware
Application	Gas Furnace

Compatibility

Fits ICP, Tempstar, Heil, Comfortmaker and Arcoaire furnace model RGS213SSCA0AAAA and related units originally equipped with OEM part 1183618. Match your existing board's part number and connector layout before installing.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
Access — Remove the furnace control/service panel.
Document — Photograph every connector and wire harness before disconnecting.
Remove — Unplug all harnesses, note the configuration of any jumpers or dip switches, and unscrew the old board.
Install — Mount the new board, set jumpers/dip switches to match the original, and reconnect every harness per your photo.
Test — Restore power and confirm a full ignition cycle with no fault codes on the diagnostic LED.

Signs You Need a Replacement

Furnace completely unresponsive with no diagnostic LED
No ignition sequence initiated on a heat call
Blower or inducer runs constantly or never energizes
Hard-fault or board-error code flashing on the LED

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Control Board Kit for RGS213...

$227.50

Frequently Asked Questions

Does this Control Board fit my ICP RGS213SSCA0AAAA — Furnace Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS213SSCA0AAAA — Furnace Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS213SSCA0AAAA — Furnace Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu