What are the specs for this Control Board?

The correct replacement for ICP model RGS213SEEA0AAAA — Integrated Furnace Control | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS213SEEA0AAAA — Integrated Furnace Control | Ships Today.

ICP

ICP Control Board Kit for RGS213SEEA0AAAA — Integrated Furnace Control | Ships Today

Name: ICP Control Board Kit for RGS213SEEA0AAAA — Integrated Furnace Control | Ships Today
Brand: ICP
SKU: 1183618
Price: 245.70 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM ICP control board kit (part number 1183618) is the integrated furnace control (IFC) that manages the entire heating sequence — inducer startup, igniter timing, gas valve operation, flame verification, blower control, and built-in safety lockouts. As the brain of the furnace, it monitors limit and pressure switches and runs the diagnostic flash codes. Boards fail from voltage surges, heat stress, failed relays, and cracked solder joints, producing erratic operation, no-heat conditions, or blank diagnostics.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP / Heil / Tempstar
Function	Ignition, blower, gas valve, and safety control
Format	OEM kit with mounting hardware

Compatibility

Direct-fit OEM replacement kit for ICP / Heil / Tempstar / Comfortmaker model RGS213SEEA0AAAA. Control board kits are application-specific — confirm the part number against your existing board before installation.

Installation Guide

Safety First — Disconnect power and shut off gas, then verify zero voltage with a multimeter.
Access — Remove the furnace control/service panel.
Document — Photograph every wire harness and connector position on the old board before disconnecting.
Remove — Unplug all connectors, remove the mounting screws, and lift out the old board.
Install — Mount the new board from the kit and transfer each harness to the matching terminal per your photos.
Test — Restore power and gas, then run a full heat cycle and confirm normal diagnostic flash codes.

Signs You Need a Replacement

No response on a call for heat — inducer and igniter stay dead
Erratic cycling, random shutdowns, or stuck blower
No diagnostic LED or a hard-lockout fault code
Visible burn marks, scorched relays, or corrosion on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Control Board Kit for RGS213...

$245.70

Frequently Asked Questions

Does this Control Board fit my ICP RGS213SEEA0AAAA — Integrated Furnace Control | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS213SEEA0AAAA — Integrated Furnace Control | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS213SEEA0AAAA — Integrated Furnace Control | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu