What are the specs for this Control Board?

The correct replacement for ICP model RGS102SEBA0AAA — Integrated Furnace Control Kit | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS102SEBA0AAA — Integrated Furnace Control Kit | Ships Today.

ICP

ICP Control Board for RGS102SEBA0AAA — Integrated Furnace Control Kit | Ships Today

Name: ICP Control Board for RGS102SEBA0AAA — Integrated Furnace Control Kit | Ships Today
Brand: ICP
SKU: 1183618
Price: 193.70 USD
Availability: InStock

SKU: 1183618 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM control board kit (part number 1183618) is the integrated furnace control (IFC) for the ICP RGS102SEBA0AAA gas furnace. The control board is the brain of the furnace — it manages the ignition sequence, monitors the flame sensor and pressure switch safeties, controls inducer and blower timing, and coordinates the gas valve and igniter. When this board fails, the furnace will not run or will lock out even though every other component is healthy. Common failure symptoms include no response on a call for heat, error flash codes on the diagnostic LED, intermittent no-heat calls, relays that chatter or fail to energize, and scorched traces on the board surface.

Specifications

Spec	Value
Part Number	1183618
Type	Integrated Furnace Control Board Kit
Brand	ICP (Tempstar / Heil / Comfortmaker)
Fits Model	RGS102SEBA0AAA
Application	Gas Furnace
Fitment	OEM Direct Replacement

Compatibility

This control board kit is the OEM-specified replacement for the ICP RGS102SEBA0AAA furnace and the family of ICP-built equipment sold under the Tempstar, Heil, and Comfortmaker badges that share the same control platform. Always match your existing board's markings before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker, then verify zero voltage with a multimeter.
Access — Remove the furnace blower-compartment service panel to expose the control board.
Document — Take a clear photo of every wire and connector before disconnecting anything.
Remove — Unplug the molex harnesses and spade terminals, remove the mounting standoffs, and lift out the old board.
Install — Mount the new board and reconnect each harness and terminal exactly as shown in your photo.
Test — Restore power and run a full heat cycle; confirm proper ignition, blower timing, and no fault codes.

Signs You Need a Replacement

Furnace does not respond at all to a call for heat.
Diagnostic LED shows a hard-lockout or board-fault flash code.
Inducer or blower fails to start or runs at the wrong time.
Visible burn marks, melted connectors, or scorched traces on the board.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Control Board for RGS102SEBA...

$193.70

Frequently Asked Questions

Does this Control Board fit my ICP RGS102SEBA0AAA — Integrated Furnace Control Kit | Ships Today?

Yes. This is the factory-specified OEM control board for the ICP RGS102SEBA0AAA — Integrated Furnace Control Kit | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my ICP RGS102SEBA0AAA — Integrated Furnace Control Kit | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu