What amp contactor do I need for my ICP system?

The correct replacement for ICP model RYMA75N001 3-Pole 30A 24V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RYMA75N001 3-Pole 30A 24V | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor Kit for RYMA75N001 3-Pole 30A 24V | Ships Today

Name: ICP Contactor Kit for RYMA75N001 3-Pole 30A 24V | Ships Today
Brand: ICP
SKU: 1054735
Price: 49.40 USD
Availability: InStock

SKU: 1054735 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM contactor kit fits the ICP RYMA75N001 heat pump and covers the unit's switching options: a 3-pole 30A contactor (parts 1070823 and 607339) and a 2-pole 20A contactor (part 1054735), all with a 24V coil. The contactor is the high-current switch that energizes the compressor and condenser fan whenever the thermostat calls. Its coil pulls in on 24V to close the line-voltage contacts. Pitted, welded, or chattering contacts are one of the most common no-cooling and no-heating failures on a heat pump.

Specifications

Spec	Value
Part Numbers	1054735 (2P 20A), 1070823 / 607339 (3P 30A)
Type	Definite Purpose Contactor
Brand	ICP
Coil Voltage	24V
Poles	2-Pole / 3-Pole
Rating	20A / 30A
Application	Heat Pump Compressor & Condenser Fan

Compatibility

Direct-fit OEM replacement for the ICP / Tempstar / Heil RYMA75N001 heat pump. Confirm the pole count and amp rating of your existing contactor (part 1054735, 1070823, or 607339) before ordering.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and verify zero voltage with a multimeter.
Access — Remove the outdoor unit service panel.
Document — Photograph all line, load, and 24V coil connections before disconnecting.
Remove — Transfer wires one at a time, or label them, then unscrew and lift out the old contactor.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
Test — Restore power and verify the contactor pulls in on a call and the compressor and fan start.

Signs You Need a Replacement

Compressor and condenser fan won't start on a cooling or heating call
Buzzing or chattering from the contactor
Pitted, blackened, or welded contacts
Unit won't shut off because contacts are stuck closed

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor Kit for RYMA75N001...

$49.40

Frequently Asked Questions

Does this Contactor fit my ICP RYMA75N001 3-Pole 30A 24V | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RYMA75N001 3-Pole 30A 24V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RYMA75N001 3-Pole 30A 24V | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu