What amp contactor do I need for my ICP system?

The correct replacement for ICP model RGS300HDAA0AAAA – 2P 30A & 3P 60A 24V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number RGS300HDAA0AAAA – 2P 30A & 3P 60A 24V | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor Kit for RGS300HDAA0AAAA – 2P 30A & 3P 60A 24V | Ships Today

Name: ICP Contactor Kit for RGS300HDAA0AAAA – 2P 30A & 3P 60A 24V | Ships Today
Brand: ICP
SKU: 1171554
Price: 50.70 USD
Availability: InStock

SKU: 1171554 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM contactor kit covers the definite-purpose contactors for the ICP / Tempstar / Heil RGS300HDAA0AAAA system: part 1171554 (2-pole, 30A, 24V coil) and part 1183142 (3-pole, 60A, 24V coil). A contactor uses a 24-volt control signal to pull in a set of heavy-duty contacts that switch line voltage to the compressor, fan motor, or electric-heat loads. Over time the contacts pit, arc, and weld, while the coil can burn open — causing no-start conditions, chattering, or a unit that won't shut off. Installing fresh OEM contactors restores clean, positive switching and protects the motors and heaters downstream.

Specifications

Spec	Value
Part Numbers	1171554 (2P), 1183142 (3P)
Type	Definite-Purpose Contactor
Brand	ICP (Tempstar / Heil)
Poles	2-Pole / 3-Pole
Rating	30A (2P) / 60A (3P)
Coil Voltage	24V

Compatibility

Direct OEM replacements for the ICP Tempstar Heil RGS300HDAA0AAAA and related models that use the 24V 30A 2-pole and 60A 3-pole contactors. Match the pole count, amp rating, and 24V coil to your existing component before installing.

Installation Guide

Safety First – Disconnect power at the breaker and verify zero voltage with a multimeter.
Access – Remove the electrical-compartment service panel.
Document – Photograph all line, load, and coil wiring before disconnecting.
Remove – Transfer wires one at a time, unscrew the old contactor, and lift it out.
Install – Mount the new contactor and reconnect each terminal exactly per your photo.
Test – Restore power and confirm the contactor pulls in cleanly with no chatter on a call.

Signs You Need a Replacement

Pitted, burned, or welded contacts
Buzzing or chattering when energized
Unit won't start or won't shut off
Open coil that fails to pull the contacts in

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor Kit for RGS300HDAA...

$50.70

Frequently Asked Questions

Does this Contactor fit my ICP RGS300HDAA0AAAA – 2P 30A & 3P 60A 24V | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP RGS300HDAA0AAAA – 2P 30A & 3P 60A 24V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP RGS300HDAA0AAAA – 2P 30A & 3P 60A 24V | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu