ICP Contactor for YL024GA1 — 1-Pole 25A 24V Coil | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This OEM single-pole contactor (part #1050699) is the primary electrical switch that energizes the compressor and condenser fan in your ICP, Tempstar, and Heil YL024GA1 heat pump. Rated for 25 amps with a 24V coil, the contactor pulls in when the thermostat calls for cooling or heating, closing its main contacts to deliver line voltage to the compressor. Over time the silver contacts pit, burn, and weld from constant arcing, while the coil can fail open. Common failure symptoms include a unit that won't start, a buzzing or chattering relay, contacts that stick closed so the compressor never shuts off, or a clicking sound with no compressor engagement. Replacing a worn contactor is one of the most common and inexpensive HVAC repairs.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1050699 |
| Type | Definite Purpose Contactor |
| Poles | 1 (Single-Pole) |
| Contact Rating | 25 Amps |
| Coil Voltage | 24V |
| Brand | ICP / Tempstar / Heil |
| Fit | OEM Replacement |
Compatibility
Designed as a direct-fit OEM replacement for the ICP / Tempstar / Heil YL024GA1 condensing unit. Also fits a wide range of ICP-family equipment using a 25A, 24V-coil single-pole definite purpose contactor. Always verify your existing contactor's amp rating, pole count, and coil voltage against the part you are replacing.
Installation Guide
- Safety First — Disconnect power at the disconnect box and breaker, then verify zero voltage with a multimeter before touching any terminals.
- Access — Remove the condensing unit service panel to expose the control area.
- Document — Photograph all wire connections before disconnecting anything.
- Remove — Note the line, load, and 24V coil terminal positions, then transfer wires one at a time or label them; unscrew the old contactor from the bracket.
- Install — Mount the new contactor and reconnect each wire exactly per your photo, confirming the coil leads land on the 24V terminals.
- Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor and fan start.
Signs You Need a Replacement
- Unit hums or buzzes but the compressor will not start.
- Pitted, blackened, or welded contacts.
- Compressor runs continuously because contacts are stuck closed.
- Chattering or rapid clicking from the contactor when energized.
Shipping & Returns
Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days