What amp contactor do I need for my ICP system?

The correct replacement for ICP model YJ060G2 — 1-Pole 35A 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number YJ060G2 — 1-Pole 35A 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor for YJ060G2 — 1-Pole 35A 24V Coil | Ships Today

Name: ICP Contactor for YJ060G2 — 1-Pole 35A 24V Coil | Ships Today
Brand: ICP
SKU: 1050839
Price: 32.44 USD
Availability: InStock

SKU: 1050839 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole definite purpose contactor (part number 1050839) for the ICP / Tempstar / Heil YJ060G2 heat pump condensing unit. The contactor is the electrically controlled switch that energizes the compressor and outdoor fan motor whenever the thermostat calls for cooling or heating. A 24V signal from the control circuit pulls in the coil, closing a 35-amp contact set that delivers line voltage to the compressor. Rated at 35A with a 24V coil, this 1-pole device is built for the high inrush and continuous load of a residential condensing unit. Common failure signs include pitted or welded contacts, a buzzing or chattering coil, and an outdoor unit that will not start or will not shut off.

Specifications

Spec	Value
Part Number	1050839
Type	Definite Purpose Contactor
Poles	1 (Single-Pole)
Contact Rating	35A
Coil Voltage	24V
Brand	ICP / Tempstar / Heil
Fitment	OEM

Compatibility

Engineered for the ICP-family YJ060G2 heat pump and shared across many Tempstar, Heil, Comfortmaker, and Arcoaire condensing units using the same control platform. Always confirm against the part number printed on your existing contactor before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and verify zero voltage with a multimeter.
Access — Remove the control-panel service cover on the condensing unit.
Document — Photograph all line, load, and 24V coil wires before disconnecting.
Remove — Label and pull the wires, then unscrew the old contactor from its mounting bracket.
Install — Mount the new contactor and reconnect each wire exactly per your photo.
Test — Restore power, call for cooling, and confirm the contactor pulls in and the compressor starts.

Signs You Need a Replacement

Outdoor unit hums but the compressor and fan won't start
Loud chattering or buzzing from the contactor
Burned, pitted, or welded-shut contacts
Unit fails to shut off when the thermostat is satisfied

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor for YJ060G2 — 1-Po...

$32.44

Frequently Asked Questions

Does this Contactor fit my ICP YJ060G2 — 1-Pole 35A 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP YJ060G2 — 1-Pole 35A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP YJ060G2 — 1-Pole 35A 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu