Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
ICP Contactor for WPG3484115LKC1 — 1-Pole 40A 24V Coil | Ships Today
ICP

ICP Contactor for WPG3484115LKC1 — 1-Pole 40A 24V Coil | Ships Today

SKU: 1173690 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM single-pole definite purpose contactor (part #1173690) for the ICP/Tempstar/Heil WPG3484115LKC1 packaged unit. The contactor is the electromechanical switch that energizes the compressor and condenser fan motor whenever the 24V thermostat signal calls for cooling. When the coil receives 24 volts, the magnetic plunger pulls the main contacts closed, passing line voltage to the compressor circuit. Rated for 40 amps with a 24V control coil, it handles the high inrush current of compressor startup. A failing contactor is one of the most common causes of an outdoor unit that hums but won't start, or a system that won't shut off — pitted, burned, or welded contacts and a chattering or dead coil are the usual culprits.

Specifications

Spec Value
Part Number 1173690
Type Definite Purpose Contactor
Brand ICP (Tempstar / Heil)
Poles 1-Pole
Contact Rating 40 Amps
Coil Voltage 24V
Fit OEM Direct Replacement

Compatibility

Direct OEM fit for the ICP/Tempstar/Heil WPG3484115LKC1 packaged system. This 40A 1-pole, 24V-coil contactor is also a common service replacement across many comparable ICP-family condensing units and packaged units that use the same footprint and electrical rating. Always confirm pole count, amp rating, and coil voltage against the part you are removing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage at the contactor terminals with a multimeter.
  2. Access — Remove the unit's electrical access panel.
  3. Document — Photograph all wire connections before disconnecting anything.
  4. Remove — Label and disconnect the line, load, and 24V coil wires, then unscrew the old contactor from its bracket.
  5. Install — Mount the new contactor and reconnect each wire exactly per your photo.
  6. Test — Restore power and confirm the contactor pulls in on a cooling call and drops out cleanly when satisfied.

Signs You Need a Replacement

  • Outdoor unit hums or buzzes but compressor/fan won't start
  • Burned, pitted, or melted contacts visible on inspection
  • System won't turn off — contacts welded closed
  • Chattering coil or no continuity through the coil at 24V

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my ICP WPG3484115LKC1 — 1-Pole 40A 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the ICP WPG3484115LKC1 — 1-Pole 40A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my ICP WPG3484115LKC1 — 1-Pole 40A 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my ICP contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online