What amp contactor do I need for my ICP system?

The correct replacement for ICP model WPG3302060RKB1 — 1-Pole 25A 24V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your ICP equipment which lists the model number WPG3302060RKB1 — 1-Pole 25A 24V | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

ICP

ICP Contactor for WPG3302060RKB1 — 1-Pole 25A 24V | Ships Today

Name: ICP Contactor for WPG3302060RKB1 — 1-Pole 25A 24V | Ships Today
Brand: ICP
SKU: 1173689
Price: 32.44 USD
Availability: InStock

SKU: 1173689 Brand: ICP

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM 1-pole, 25-amp definite purpose contactor (part #1173689) is the electrical switch that powers the compressor and condenser fan on the ICP/Heil/Tempstar WPG3302060RKB1 packaged unit. When the thermostat calls for cooling, its 24V coil energizes and pulls the contacts closed, sending line voltage to the compressor. Because the contacts arc every time they open and close, they eventually pit, burn, or weld — causing the unit to fail to start, chatter, or run continuously. A failed coil leaves the unit completely unresponsive to a cooling call. Replacing the contactor with the correct factory part restores clean, reliable switching.

Specifications

Spec	Value
Part Number	1173689
Type	Definite Purpose Contactor
Brand	ICP / Heil / Tempstar
Poles	1-Pole
Rating	25 Amps
Coil Voltage	24V
Fit	OEM Direct Replacement

Compatibility

Direct-fit replacement for the ICP unit WPG3302060RKB1 and the shared Heil, Tempstar, Comfortmaker, and Keeprite chassis. Confirm the 1-pole configuration, 25A rating, and 24V coil against your existing contactor before ordering.

Installation Guide

Safety First — Disconnect power at the breaker and disconnect; verify zero voltage with a multimeter.
Access — Remove the electrical access panel.
Document — Photograph every line, load, and 24V coil wire before disconnecting.
Remove — Transfer wires one at a time or label them, then unbolt the old contactor from its rail.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
Test — Restore power and run a cooling cycle; confirm the contacts pull in cleanly and the compressor starts.

Signs You Need a Replacement

Compressor and condenser fan will not start on a cooling call
Loud chattering or buzzing from the contactor
Pitted, burnt, or welded contacts
Coil does not pull in with 24V applied

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

ICP Contactor for WPG3302060RKB1...

$32.44

Frequently Asked Questions

Does this Contactor fit my ICP WPG3302060RKB1 — 1-Pole 25A 24V | Ships Today?

Yes. This is the factory-specified OEM contactor for the ICP WPG3302060RKB1 — 1-Pole 25A 24V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my ICP WPG3302060RKB1 — 1-Pole 25A 24V | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many ICP parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my ICP contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu